i just install the fuji exhuast and y pipe but the tips in the back are uneven the left side is lower then the right side i tryed moving the rubber mount but nothing any suggestions

 

I had a problem with the right side being ever so slightly lower than the left side. I loosened everything up and propped the right tip up with a jack stand. Then I tightened all of the bolts back up, and removed the jack stand and all was well.

 

Sounds like a simple adjustment. As ronesci says, just loosen some of the bolts to adjust. I'd start with the coupling just ahead of the muffler to allow a slight rotation of the muffler, and perhaps a little sideways movement too.

 

Thanks I Will Try That Prob Tommorrow