04 G35 sedan SES light up after mods! Need help

Reply Subscribe

Thread Tools

Search this Thread

Rate Thread

Aug 20, 2014 | 05:22 AM

#16

mliu66

Thread Starter

Registered User

iTrader: (2)

Joined: Apr 2003

Posts: 59

Likes: 1

BTW, does everyone use OEM sensor or aftermarket sensor? I bought a dirty cheap knock sensor and the seller said it is the same, not sure if it can work as original sensor.

Aug 26, 2014 | 04:41 PM

#17

ray1370

Registered User

iTrader: (14)

Joined: Jun 2008

Posts: 525

Likes: 39

From: SoCal, OC

I use an aftermarket sensor, it works fine and it should outlast the harness lol. Just make sure the plug fits.

Sep 4, 2014 | 06:20 AM

#18

mliu66

Thread Starter

Registered User

iTrader: (2)

Joined: Apr 2003

Posts: 59

Likes: 1

I just noticed there is a hole in front of the engine block, from where I can see the sensor. I am wonder if it is possible to use some long reach tools to get it replaced without opening the intake...

Sep 6, 2014 | 07:23 PM

#19

mliu66

Thread Starter

Registered User

iTrader: (2)

Joined: Apr 2003

Posts: 59

Likes: 1

OK got a problem. The harness is mounted on a bracket under the car, should that be removed and then reinstalled? It's hard to take the harness off from the clip under the car

Sep 9, 2014 | 09:33 PM

#20

ray1370

Registered User

iTrader: (14)

Joined: Jun 2008

Posts: 525

Likes: 39

From: SoCal, OC

If you can fit the tool in then you can take the bracket off. Or you can try wiggling the connector and pushing up to make it slide out of the bracket.