Plenum spacer install problem

Reply Subscribe

Thread Tools

Search this Thread

Rate Thread

Sep 28, 2014 | 02:47 PM

#16

Hembroff

Thread Starter

Registered User

Joined: Jul 2014

Posts: 13

Likes: 0

From: Minnesota

Quote:

Originally Posted by Gdirtyfive55

Oh, haha. That bolt needs to come out completely. You can use a 4.5mm socket to extract it (I understand it looks like a star thingie, but a 4.5 or 5mm socket works). I don't remember anything replacing it.

Thanks man! They came out. Now what do I screws do I replace them with?

Sep 28, 2014 | 02:48 PM

#17

ScraggleRock

Registered User

iTrader: (4)

Joined: Dec 2013

Posts: 6,811

Likes: 738

Quote:

Originally Posted by Hembroff

Thanks man! They came out. Now what do I screws do I replace them with?

Wait, I think its just replaced by one of those 18 bolts..can't really remember. Count the holes you need to fill and count how many screws you have. You'll figure it out.

Sep 28, 2014 | 03:58 PM

#18

Hembroff

Thread Starter

Registered User

Joined: Jul 2014

Posts: 13

Likes: 0

From: Minnesota

Quote:

Originally Posted by Gdirtyfive55

Wait, I think its just replaced by one of those 18 bolts..can't really remember. Count the holes you need to fill and count how many screws you have. You'll figure it out.

Got another question for you can you please tell me how to hook this sensor and harness back up I completely forgot how I took it off and can't figure out how to put it back on..

http://flic.kr/p/p9V8u8

Sep 28, 2014 | 04:13 PM

#19

Lartytiejdke3

Banned

iTrader: (6)

Joined: Aug 2011

Posts: 244

Likes: 989

Quote:

Originally Posted by Gdirtyfive55

Dude, calm down. There's 6 long screws that go in the middle and 18 screws (that are all the same length) that go around the 18 holes in the edges of the plenum.

out right now OP. I'll keep Tryin
Don't forget
The top three bolts on the main 6 are longer than the bottom 3 of the main 6. IIRC these longest three are also the same size that go inside the gooseneck part of the plenum as well