Engine, Drivetrain & Forced-Induction Have Technical Questions or Done Modifications to the G35? Find out the answer in here! (View All Posts)
Sponsored by:
Sponsored by: CARiD

P0171 need help

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jul 5, 2016 | 11:48 PM
  #1  
Popes's Avatar
Thread Starter
|
Registered User
Joined: Jul 2015
Posts: 12
Likes: 0
P0171 need help

So I have a 2004 G35 sedan 5at and one night I filled in gas to full tank, I always filled up fill at 1/4 tank same gas station. About 40 mins into driving I noticed when I accelerated from a stop there would be a hesitation the the rpm would jump up to where it should be almost like the injectors is clogged?

So I changed the fuel pump it helped a little, changed spark plugs, crank, alternator sensor, cleaned throttle body and MAF also switched with another MAF that I know is working. So everytime I start the car and let it idle at around 40 minutes it will start to run rough and it will die unless give it gas, does this constantly. I haven't ran injector cleaner yet I'm wondering before I buy new injectors should I check anything else first?
 

Last edited by Popes; Jul 5, 2016 at 11:53 PM.
Reply
Old Jul 6, 2016 | 01:47 AM
  #2  
hurleyguys's Avatar
Registered User
iTrader: (9)
Joined: Feb 2009
Posts: 1,008
Likes: 43
From: 310 Socal
be sure to check there are no leaks after the MAF and before the O2 sensor.

any mods?
 
Reply
Old Jul 6, 2016 | 02:18 AM
  #3  
Popes's Avatar
Thread Starter
|
Registered User
Joined: Jul 2015
Posts: 12
Likes: 0
Originally Posted by hurleyguys
be sure to check there are no leaks after the MAF and before the O2 sensor.

any mods?
Z tube and plenum space, I forgot to add that I retorqued the plenum bolts and have no air leaks. Which o2 sensor should I look at the top or near the cats
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nrg1
Wheels & Tires
4
Mar 20, 2016 01:51 AM
Jiggs1219
G35 Sedan V36 2007- 08
6
Feb 25, 2016 08:30 AM
David Sanders
Engine, Drivetrain & Forced-Induction
0
Feb 20, 2016 10:51 PM
forestzemel
Engine, Drivetrain & Forced-Induction
7
Feb 20, 2016 08:25 AM
Bean_VQ35DE
Engine, Drivetrain & Forced-Induction
0
Feb 19, 2016 08:44 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:34 AM.