Engine misfire
#1
Engine misfire
So ive been dealing with a misfire problem for the past couple of weeks, It started with p0011 and p0021 codes. I replaced both camshaft position sensors, and the crankshaft position sensor, the misfires went away for a few hours then came back, I changed the oil (it was dirty), the engine sputtering went away but the engine code stayed. About a week later the misfires returned, so I checked the connection on the solenoids and one wasnt completely connected so I pulled the solenoids and this is what i found in the solenoid
Metal flakes
Thread
Thread Starter
Forum
Replies
Last Post
dbarnes
Engine, Drivetrain & Forced-Induction
4
09-07-2013 06:28 PM