WHAT SIZE BELTS FOR CRANK PULLEY?
#1
Join Date: Jul 2003
Location: Marin County, Ca.
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
#2
#4
Re: WHAT SIZE BELTS FOR CRANK PULLEY?
hey ramo
I got the whole set but I ma scared to put it on after talking to Daug at Crawford Z Service. He said that if the crank pulley is a single piece (which it is) he WOULD NOT put it on his car. This is because the OEM crank pulley is supposedly a two-piece with a dampener in between the two pieces. This is done so that at ~6000 rpm the pulley does not shake the crankshaft, which could obviusly led to problems down the road. I am gonna go by the infiniti dealer to confirm this. If the OEM one is dampened and the UA one is not, I would NOT put it on.
What do you think?
Gurgen
2003.0 G35 5AT Sedan
Sport/Winter/Aero
<font color=red>Injen CAI</font color=red>
Eibach Pro Kit
Clear side markers
UR Racing Pulleys - set of 3
Cusco Strut Tower Bar (soon)
Cusco Sway Bars (soon)
I got the whole set but I ma scared to put it on after talking to Daug at Crawford Z Service. He said that if the crank pulley is a single piece (which it is) he WOULD NOT put it on his car. This is because the OEM crank pulley is supposedly a two-piece with a dampener in between the two pieces. This is done so that at ~6000 rpm the pulley does not shake the crankshaft, which could obviusly led to problems down the road. I am gonna go by the infiniti dealer to confirm this. If the OEM one is dampened and the UA one is not, I would NOT put it on.
What do you think?
Gurgen
2003.0 G35 5AT Sedan
Sport/Winter/Aero
<font color=red>Injen CAI</font color=red>
Eibach Pro Kit
Clear side markers
UR Racing Pulleys - set of 3
Cusco Strut Tower Bar (soon)
Cusco Sway Bars (soon)
#5
Join Date: Jul 2003
Location: Marin County, Ca.
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
#6
Re: WHAT SIZE BELTS FOR CRANK PULLEY?
Let us know what you find out about the pulley design. I had plyyeys on my mustang and the crank pulley was not properly torqued down and it was throwing CEL lights. I fixed it, but heard of some people on a mustang board that never got a CEL but basically ripped their engine apart becuase the thing was wobbling at high RPMs. Some had to have the whole engine replaced.
Anyway, it was a great mod one it worked, more power, faster revving engine, etc., but it must be done right. Let me know what you find out, as I'd liek to get the pulleys too.
Anyway, it was a great mod one it worked, more power, faster revving engine, etc., but it must be done right. Let me know what you find out, as I'd liek to get the pulleys too.
#7
Re: WHAT SIZE BELTS FOR CRANK PULLEY?
ok guys
will do some research tomorrow and report back tomorrow night.
gurgen
2003.0 G35 5AT Sedan
Sport/Winter/Aero
<font color=red>Injen CAI</font color=red>
Eibach Pro Kit
Clear side markers
UR Racing Pulleys - set of 3
Cusco Strut Tower Bar (soon)
Cusco Sway Bars (soon)
will do some research tomorrow and report back tomorrow night.
gurgen
2003.0 G35 5AT Sedan
Sport/Winter/Aero
<font color=red>Injen CAI</font color=red>
Eibach Pro Kit
Clear side markers
UR Racing Pulleys - set of 3
Cusco Strut Tower Bar (soon)
Cusco Sway Bars (soon)
Thread
Thread Starter
Forum
Replies
Last Post
StreetStandard
Wheels & Tires-Vendor
80
08-30-2016 01:21 PM
k67p67
Engine - Power Adders
0
08-29-2015 08:19 PM