FS[MidWest]: OEM EXHAUST (HR Y, DE Y, 350z MID, COUPE MID)
Joined: Jul 2010
Posts: 765
Likes: 39
From: Western Colorado
OB '04 Coupe Premium w/Performance Wheel & Tire
OEM EXHAUST (HR Y, DE Y, 350z MID, COUPE MID)
I need to make some space in my garage, and these items will need to go. Keep in mind I am in Western Colorado, Shipping will be covered by the buyer. If you are local to Colorado, I can arrange to meet somewhere halfway.
*****SOLD***** First item: This is an OEM 2008 350z HR Y-Pipe, its the real deal not the smaller G35(HR), G37/370z Y-Pipe that people try to pass off as this one. The inlets are 2" and the outlet is 2.5". It matches up perfect to the OEM mid, it was designed to maximize performance using OEM sized piping. With approximately 60k Miles, the heat shield has a bend on it and the passenger flex joint has some frays, there are no leaks, bends or kinks to the actual Pipe, It will need a new stud on the collector end. Im asking $80 + Ship & PayPal.
Second item: OEM 2006 G35(RWD) DE Y-Pipe, it has been sitting in my storage unit since I took it off. It was used for approximately 45k miles. The inlets are 1.85" and the outlet is 2.25". I will take no less than $50 + Ship & PayPal.

INLET

OUTLET

*****SOLD***** Third item: CURRENTLY ON THE CAR, an extended OEM 2003 350z Mid-Pipe, again this is an already extended Mid-Pipe which makes it a Coupe Mid-Pipe. The extension is welded on, you can remove it to fit your 350z. The inlet is 2.5" and outlet is 2.5", it frees up flow by using a calsonic resonator instead of a chambered resonator like the sedans use. On top of better flow, there's the added growl that gives it a similar note to the Coupe/FX/Z. Again no less than $50 + Ship & PayPal.
Fourth item: ONE extension that I used on my NOW extended 350z Middy, it will bolt up after the Y before the Mid-Pipe. It is 2.25" inlet and 2.25" outlet, you will need to grind the flange bolt holes a bit to get the studs through, in this case you will only need one extension. $20 each + Ship & PayPal.


Fifth item: This is a flex joint that came off a MEGAN HR Y-Pipe, the other one got shredded and I welded straight pipes on it. this is in good working condition, no leaks, but some serious frays on the outer flex shield. these usually sell for $40 new, will gladly take $10 + Ship & PayPal.


Sixth Item: OEM 2006 Sedan Muffler, has approximately 90,xxx Miles on it. $75 + Ship & PayPal.
*****SOLD***** First item: This is an OEM 2008 350z HR Y-Pipe, its the real deal not the smaller G35(HR), G37/370z Y-Pipe that people try to pass off as this one. The inlets are 2" and the outlet is 2.5". It matches up perfect to the OEM mid, it was designed to maximize performance using OEM sized piping. With approximately 60k Miles, the heat shield has a bend on it and the passenger flex joint has some frays, there are no leaks, bends or kinks to the actual Pipe, It will need a new stud on the collector end. Im asking $80 + Ship & PayPal.
Second item: OEM 2006 G35(RWD) DE Y-Pipe, it has been sitting in my storage unit since I took it off. It was used for approximately 45k miles. The inlets are 1.85" and the outlet is 2.25". I will take no less than $50 + Ship & PayPal.

INLET

OUTLET

*****SOLD***** Third item: CURRENTLY ON THE CAR, an extended OEM 2003 350z Mid-Pipe, again this is an already extended Mid-Pipe which makes it a Coupe Mid-Pipe. The extension is welded on, you can remove it to fit your 350z. The inlet is 2.5" and outlet is 2.5", it frees up flow by using a calsonic resonator instead of a chambered resonator like the sedans use. On top of better flow, there's the added growl that gives it a similar note to the Coupe/FX/Z. Again no less than $50 + Ship & PayPal.
Fourth item: ONE extension that I used on my NOW extended 350z Middy, it will bolt up after the Y before the Mid-Pipe. It is 2.25" inlet and 2.25" outlet, you will need to grind the flange bolt holes a bit to get the studs through, in this case you will only need one extension. $20 each + Ship & PayPal.


Fifth item: This is a flex joint that came off a MEGAN HR Y-Pipe, the other one got shredded and I welded straight pipes on it. this is in good working condition, no leaks, but some serious frays on the outer flex shield. these usually sell for $40 new, will gladly take $10 + Ship & PayPal.


Sixth Item: OEM 2006 Sedan Muffler, has approximately 90,xxx Miles on it. $75 + Ship & PayPal.
Last edited by re-crue13; Apr 24, 2013 at 04:32 PM.
Trending Topics
Joined: Jul 2010
Posts: 765
Likes: 39
From: Western Colorado
OB '04 Coupe Premium w/Performance Wheel & Tire
HR Y is still available, pending payment if by the end of tonight he doesn't PM, I will move on to the next person.
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Steering & Suspension CDN
0
Jul 24, 2015 11:25 AM




