FS: UPREV GT MAF Sensor
#1
12-08-2011, 02:34 AM
UPREV GT MAF Sensor
Like the title says. I have began parting out my Turbo setup and VQ35DE NON Revup block and this is one of the items up for sale. I will be going back to stock. I purchased this from Z1 Motorsports earlier this year and its been installed for around 4000 miles with my turbo.
If you have any questions please let me know.
Retail is 350.00 for this piece + shipping. Get it discounted and barely used for a $50.00 Savings. I am asking $300 shipped.
I can prove this item if you would like showing my reciept from Z1 Motorsports since its really hard to justify the OEM versus this one.
From UPREV's Site:
http://uprev.com/secure/accessories/uprev-maf-gt.html
Product Description.The UpRev MAF GT is an upgrade sensor for Nissan Vehicles using Hitachi Part # W0133-1723137 in forced induction applications only.
UpRev MAF GT sensor will read almost 180% the air flow range of the factory sensor while allowing stable idle air flow measurements. If you have a Nissan or Infiniti vehicle that you're adding Forced Induction to, you will need this upgraded MAF Sensor. We've worked for many years to offer a MAF sensor that we can put our name on. Finally we have the right sensor. Years of being the only manufacturer to support Forced Induction properly on the Nissan vehicles using the factory ECU has allowed us to understand what our customers need and this is the product we've brought to market.
UpRev MAF GT sensor works on a wide range of current and older model Nissan and Infiniti vehicles. The diameter of the MAF tube changes, so and exact HP or Flow range cannot be stated for each vehicle. Nissan has generally matched the Factory MAF tube to reach the 4.9v range at 130% over the factory HP. If you're adding Forced Induction you will be out flowing the factory MAF sensor. We've designed this MAF sensor to meet those needs.
*This unit requires UpRev Osiris Flash, or a third party Stand alone ECU for operation. It cannot be used on the factory tune, or with piggy back ECU units alone.
Pics:
If you have any questions please let me know.
Retail is 350.00 for this piece + shipping. Get it discounted and barely used for a $50.00 Savings. I am asking $300 shipped.
I can prove this item if you would like showing my reciept from Z1 Motorsports since its really hard to justify the OEM versus this one.
From UPREV's Site:
http://uprev.com/secure/accessories/uprev-maf-gt.html
Product Description.The UpRev MAF GT is an upgrade sensor for Nissan Vehicles using Hitachi Part # W0133-1723137 in forced induction applications only.
UpRev MAF GT sensor will read almost 180% the air flow range of the factory sensor while allowing stable idle air flow measurements. If you have a Nissan or Infiniti vehicle that you're adding Forced Induction to, you will need this upgraded MAF Sensor. We've worked for many years to offer a MAF sensor that we can put our name on. Finally we have the right sensor. Years of being the only manufacturer to support Forced Induction properly on the Nissan vehicles using the factory ECU has allowed us to understand what our customers need and this is the product we've brought to market.
UpRev MAF GT sensor works on a wide range of current and older model Nissan and Infiniti vehicles. The diameter of the MAF tube changes, so and exact HP or Flow range cannot be stated for each vehicle. Nissan has generally matched the Factory MAF tube to reach the 4.9v range at 130% over the factory HP. If you're adding Forced Induction you will be out flowing the factory MAF sensor. We've designed this MAF sensor to meet those needs.
*This unit requires UpRev Osiris Flash, or a third party Stand alone ECU for operation. It cannot be used on the factory tune, or with piggy back ECU units alone.
Pics:
Thread
Thread Starter
Forum
Replies
Last Post
