Lighten your G with a Z1 1pc Aluminum Driveshaft, Crank pulley and Idler Delete!!!
Got a reply this morning from John over at Z1 saying there are no updates on these at the moment... I officially give up. 
I will look elsewhere or just pass on a drive shaft all together.
I will look elsewhere or just pass on a drive shaft all together.
^ Good luck... It seems these are dead in the water. I've tried for months and months with nothing but pushed out time frames or no update info at all. You could try calling them and see want they say. Should be 1 of 2 answers; should have some in a month or two, or no ETA...
Yes I install it today. I also replace an o2 sensor on my header
my mechanic reset my ECU so I lost all my drive hard settings. jumped in the car felt extremely slow and sluggish. that's cause the ECU was trying to figure shik out all over again. but after 10 or 15 minutes of spirited driving. I was able to really really start to notice a difference. I'm going to go out for good long drive tonight and really open things up
Oddly enough the car feels more rigid. it feels tighter /stronger
my mechanic reset my ECU so I lost all my drive hard settings. jumped in the car felt extremely slow and sluggish. that's cause the ECU was trying to figure shik out all over again. but after 10 or 15 minutes of spirited driving. I was able to really really start to notice a difference. I'm going to go out for good long drive tonight and really open things up
Oddly enough the car feels more rigid. it feels tighter /stronger
^ I don't think a link would help because it's a closed Facebook page I'll contact the guy who is hosting the group by and I'll post his phone number up on here.
but he's very trustworthy and no bullshit kind of guy I think like 15 or 20 of them have been sold already
but he's very trustworthy and no bullshit kind of guy I think like 15 or 20 of them have been sold already
After thinking about it I don't think it's cool for me to post that information here I started a thread in review section on driver
https://g35driver.com/forums/reviews...ive-shaft.html
https://g35driver.com/forums/reviews...ive-shaft.html
For those who still might be in hopes of or reading this thread in regards to Z1's one peice drive shaft for the coupe; here is a reply from them dated 7/24/2013.
Unfortunately not available anymore.
Let us know if we can help with anything else.
Thanks,
Chuck Powers
Z1 Motorsports
Unfortunately not available anymore.
Let us know if we can help with anything else.
Thanks,
Chuck Powers
Z1 Motorsports
