quick help with belts for UR pulleys
#1
02-19-2009, 02:27 PM
Join Date: Dec 2005
Location: Jax, FL
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
quick help with belts for UR pulleys
My belt has suddenly decided to take a crappola and Infiniti doesn't wanna touch the car. This leaves the replacement up to me.
I cannot find my old UR box and pulley and such in my attic and have been unable to find the exact part number for the Gates belt. Below is what I found, but does anyone know if the "high performance" belt listed below is the smaller, v shaped belt or just a 'better' belt the same size as the OEM? The guys at Napa don't know, Nissan doesn't know and neither did Velocity Trends (Jeremy appears awol, too).
If you know the correct Gates part number to use with the UR pulley set, that would be BEST OF ALL!!!
Thanks...
Alt. & P.S. Automotive V-Ribbed Belt (Standard) K060465
High Performance Automotive V-Ribbed Belt K060465RB (Blue)
A.C. Automotive V-Ribbed Belt (Standard) K040372
High Performance Automotive V-Ribbed Belt K040372RB (Blue)
I cannot find my old UR box and pulley and such in my attic and have been unable to find the exact part number for the Gates belt. Below is what I found, but does anyone know if the "high performance" belt listed below is the smaller, v shaped belt or just a 'better' belt the same size as the OEM? The guys at Napa don't know, Nissan doesn't know and neither did Velocity Trends (Jeremy appears awol, too).
If you know the correct Gates part number to use with the UR pulley set, that would be BEST OF ALL!!!
Thanks...
Alt. & P.S. Automotive V-Ribbed Belt (Standard) K060465
High Performance Automotive V-Ribbed Belt K060465RB (Blue)
A.C. Automotive V-Ribbed Belt (Standard) K040372
High Performance Automotive V-Ribbed Belt K040372RB (Blue)
#2
02-19-2009, 03:46 PM
Join Date: Jul 2008
Location: Annapolis, MD
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
http://www.g35parts.com/9083/osc/pro...roducts_id=139
If you are using the Underdriven pulley set
If you are using the Underdriven pulley set
#3
02-19-2009, 05:41 PM
Join Date: Dec 2005
Location: Jax, FL
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
http://www.g35parts.com/9083/osc/pro...roducts_id=139
If you are using the Underdriven pulley set
If you are using the Underdriven pulley set
I'm gonna buy a few of them in the morning if I don't get a response...they can at least get me the two I've cited...
#4
02-19-2009, 10:04 PM
Join Date: Dec 2005
Location: Jax, FL
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
Man--you guys SUCK. Of all the people in the world to find this, it was my wife!!!
Crankshaft Pulley Bolt Torque Specifications
• First Step: 29 – 36 ft-lbs. / 348 – 432 in-lbs. / 39 – 49 NM.
• Second Step: The head of the pulley bolt has 6 lines, each representing 60-66 degrees of rotation. Choose one of the lines after completing step 1 then
make a mark on the pulley at that line then turn the the bolt until the line before the original line reaches the mark on the pulley.
New Belt Sizes (The belt sizes used may vary slightly. We recommend the use of Gates brand belts. Belt sizing can vary from belt manufacturer to belt manufacturer)
• Alternator Power Steering and Water Pump Belt: Use Gates K060445 (45 1/4” or 1150MM)
• Air Conditioning Belt: Use Gates K040353 (35 7/8” or 910MM)
* New belts will stretch naturally over the first few hundred miles so belt retensioning may be required if you hear belt squeal. Prolonged lack of
retensioning may cause irreversible damage to the pulley voiding the warranty. If a different size belt/s work better on your vehicle please let us
know the manufacturer and size of each belt/s used. You can contact us by phone or e-mail through our web page. Thank You!
Crankshaft Pulley Bolt Torque Specifications
• First Step: 29 – 36 ft-lbs. / 348 – 432 in-lbs. / 39 – 49 NM.
• Second Step: The head of the pulley bolt has 6 lines, each representing 60-66 degrees of rotation. Choose one of the lines after completing step 1 then
make a mark on the pulley at that line then turn the the bolt until the line before the original line reaches the mark on the pulley.
New Belt Sizes (The belt sizes used may vary slightly. We recommend the use of Gates brand belts. Belt sizing can vary from belt manufacturer to belt manufacturer)
• Alternator Power Steering and Water Pump Belt: Use Gates K060445 (45 1/4” or 1150MM)
• Air Conditioning Belt: Use Gates K040353 (35 7/8” or 910MM)
* New belts will stretch naturally over the first few hundred miles so belt retensioning may be required if you hear belt squeal. Prolonged lack of
retensioning may cause irreversible damage to the pulley voiding the warranty. If a different size belt/s work better on your vehicle please let us
know the manufacturer and size of each belt/s used. You can contact us by phone or e-mail through our web page. Thank You!
#5
02-19-2009, 11:36 PM
Man--you guys SUCK. Of all the people in the world to find this, it was my wife!!!
Crankshaft Pulley Bolt Torque Specifications
• First Step: 29 – 36 ft-lbs. / 348 – 432 in-lbs. / 39 – 49 NM.
• Second Step: The head of the pulley bolt has 6 lines, each representing 60-66 degrees of rotation. Choose one of the lines after completing step 1 then
make a mark on the pulley at that line then turn the the bolt until the line before the original line reaches the mark on the pulley.
New Belt Sizes (The belt sizes used may vary slightly. We recommend the use of Gates brand belts. Belt sizing can vary from belt manufacturer to belt manufacturer)
• Alternator Power Steering and Water Pump Belt: Use Gates K060445 (45 1/4” or 1150MM)
• Air Conditioning Belt: Use Gates K040353 (35 7/8” or 910MM)
* New belts will stretch naturally over the first few hundred miles so belt retensioning may be required if you hear belt squeal. Prolonged lack of
retensioning may cause irreversible damage to the pulley voiding the warranty. If a different size belt/s work better on your vehicle please let us
know the manufacturer and size of each belt/s used. You can contact us by phone or e-mail through our web page. Thank You!
Crankshaft Pulley Bolt Torque Specifications
• First Step: 29 – 36 ft-lbs. / 348 – 432 in-lbs. / 39 – 49 NM.
• Second Step: The head of the pulley bolt has 6 lines, each representing 60-66 degrees of rotation. Choose one of the lines after completing step 1 then
make a mark on the pulley at that line then turn the the bolt until the line before the original line reaches the mark on the pulley.
New Belt Sizes (The belt sizes used may vary slightly. We recommend the use of Gates brand belts. Belt sizing can vary from belt manufacturer to belt manufacturer)
• Alternator Power Steering and Water Pump Belt: Use Gates K060445 (45 1/4” or 1150MM)
• Air Conditioning Belt: Use Gates K040353 (35 7/8” or 910MM)
* New belts will stretch naturally over the first few hundred miles so belt retensioning may be required if you hear belt squeal. Prolonged lack of
retensioning may cause irreversible damage to the pulley voiding the warranty. If a different size belt/s work better on your vehicle please let us
know the manufacturer and size of each belt/s used. You can contact us by phone or e-mail through our web page. Thank You!
I was going to say that.
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
04-23-2018 11:13 AM
Mad A
Not G35 Related
4
12-08-2015 01:45 PM
