I think mine is an 03.5, got it brand new in May '03. I used the middle brown wire and had no probs.

 

take some pics of you ecu and post them. that will help me try and point you in the right direction.

 

pics of the ecu or of the ecu harness? i'm going to dive back in tomorrow. wish me luck and patience. thanks for the help guys. later

 

the harness

 

I can't upload the pics because they are too big. Can I send them to you (SFL
G35) via e-mail or can someone tell me how to reformat the pics to make them uploadable.

 

sure send them to me at daniel.bazley@kptechnologies.com or find me on AIM.

 

hey dan........still waiting on the auto door locking mod.........

 

hmm

i sent it two day.
hopefully it should be there today.
let me know if its not and ill see what i can do

 

Hey guys,

Dan installed my sunroof mod last night. I think its about the 3rd or 4th he has done. He is getting quick and I highly recommend him if your unsure about doing it yourself. And FGC discounts apply!!!

Thanks again Dan!!!

 

cool........just got the package dan

now to the install!

 

alright here are some more pin colors for you guys to check to make sure you have the right wire.

pin 10 - white / green
pin 11 - red / white
pin 12 -
pin 13 - brown - crank sensor wire
pin 14 - yellow - cam shaft

 

more from kevin

Pin 8 – NC
Pin 9 – NC
Pin 10 – White/Green
Pin 11 – Red/White
Pin 12 – Blue/White
Pin 13 – Brown (Crank angle)
Pin 14 – Yellow

Pin 6 is the start of a row (pins 1-5 are a relay)

Pin 32 (above pin 13) – Pink

All wires match up to what the service manual says they should be.

Hope this helps
guys its not that hard

tom those pics you sent are right on
that wire you have should be the coorect one.

 

I'm having a serious problem with my shift light. When I first installed it, everything was great. Now I can't see it at all.

 

http://www.kptechnologies.com/forums

Go here (it's a secret world) and post your problems. Be prepared for a rapid fire slew of posts and it might help if you keep your screen name (he he he).

Did it fall back inside of your gauge pod maybe? Did the Power wire come undone?

 

???

im lost