i apologize wat i am asking is when i installed my vortech supercharger. the oil line coming from the supercharger to the cars oil pan. i need to removed it which i can do but once i remove the oil line from the charger to the cars oil pan i will have a hole i believe its npt 3/8 or something like that in my cars oil pan. now my question is how do i plug that hole?
1.do i weld it shut
2do i get a npt threaded plug
2.etc
please help if can thanks again

 

holly cow grammar check.. hahaha

 

weld it shut

 

you can use a plug to plug it up...

 

If it is in fact a 3/8 npt thread you would use a brass or S.S. 3/8 npt pipe plug. Wrap the threads with teflon tape and only tighten enough to seal. Overtightening with a tapered pipe plug could crack the material its being screwed into. If this doesn't make sense have a mechanic do it.

 

thanks and sorry about my grammer lol i was in a hurry and didnt pay much attention to my spelling nor punctuation! where would i be able to pick up a 3/8 npt threaded pipe plug?

 

Hardware store.

 

they sell em at the auto parts store too

 

thanks again for the help.. love how everyones helpful on these forums!!!