Well if torqing the manifolds and exhaust is the only problem thats not a problem with my little shop. I have a feeling if I go vortech I'll want more and swap it for the GTT later

I still have to get wasted one of these nights enough to make the purchase ;D haha Anyone in NJ wanna go get some drinks? lol

Once I don't have to work 18 hours a day and get a few to myself I'll be able to figure this all out, I just want to hear the complications I will run into and the veterans here who know what I'm in for. It almost be an insult not to use my lift and tools ;D

Thanks all, keep it commin!

 

You will probably want to get wasted every night after the install,cause it will take a couple days.......trust me on this.

 

you really should drop the motor on the greddy install. I did by myself in my garage with just a pair of jackstands. PITA!!!

fortunately, I have enough tools be a professional mechanic. This is certainly not a job for the guy with one set of wrenches and a socket set.

even with everything I have, I still couldn't get all the torque I wanted on 2 of the nuts that hold the turbos to the manifolds.

 

+1 on dropping the motor. Its very rewarding to do the install yourself, fun at the very least! Make sure you get a tune asap afterwards tho

 

I think I will do it myself, anyone know what exhaust would work with RAS and be sufficient for the TT setup?