How is your resolution and quality of display of the CAMP2 on the stock nav screen?

Mine slightly flickers and isn't as clear as when the oem nav source is displayed

 

Mine is clear.....I use the black background......The red is not as clear...

 

Jonny if yours if flickering do you have tv and nav? It could be a ground issue transmitting noise to the screen. I also run the black background as I find it easier to read.

 

hmmm. mine flickers on every background, and in analog mode, the needles sometimes go out of place

 

I'm not sure of the brand that I'm using, I'll have to check. It does have a switch that can be used to switch b/w the factory nav and the camp2 source. I''ll mention the potential ground issue to my installer. Me wonders why the factory nav is as clear as day when switched, but when switching to the camp2 source, it flickers (sometimes pretty bad). Would a ground issue only cause flickering on the camp2 feed, but not the factory nav source?

 

Something is messing with the signal.....bad ground maybe