XKR's G40 with GTM Stroker GTM GT35r TT built by FP
#106
Registered User
iTrader: (37)
The 850s are doing great they look good sitting on my shelf I have my new head gaskets in but havent had time to reassemble everything yet....I am swamped at work but hopefully in the next week or two I can reassemble the engine and install the 850s and all of the accessories then its only a day or two to put the engine and tranny back in. I hope its all done before the end of February. Then i have to get my traction control sorted out and finish tuning the 1500rpm.
#108
Join Date: Mar 2007
Location: Sugar Land TX/Boca Raton FL/Carefree AZ
Posts: 786
Likes: 0
Received 8 Likes
on
3 Posts
I started thinking about it....you likely have over $100k in parts alone anyway it looks like it turned out very well and has set the bar for future builds IMO.
The 850s are doing great they look good sitting on my shelf I have my new head gaskets in but havent had time to reassemble everything yet....I am swamped at work but hopefully in the next week or two I can reassemble the engine and install the 850s and all of the accessories then its only a day or two to put the engine and tranny back in. I hope its all done before ZdayZ. Then i have to get my traction control sorted out and finish tuning the 1500rpm.
The 850s are doing great they look good sitting on my shelf I have my new head gaskets in but havent had time to reassemble everything yet....I am swamped at work but hopefully in the next week or two I can reassemble the engine and install the 850s and all of the accessories then its only a day or two to put the engine and tranny back in. I hope its all done before ZdayZ. Then i have to get my traction control sorted out and finish tuning the 1500rpm.
Yeah...I trust Sharif...thats the only reason I spent that much...it did turn out good....
Keep me updated on your car....see you at ZdayZ
#109
This is SICK! I first saw your car on mydomain and then headed to driver to find you. You are right. Way more info on 350z. Most people over hear on only interested in Volks and BBK's. Wish I had the cash flow to do a build like this. Family and military job just won't cut it, lol.
Keep up the work. I'm reading through the 1000's of post over on my350
Keep up the work. I'm reading through the 1000's of post over on my350
#110
Join Date: Mar 2007
Location: Sugar Land TX/Boca Raton FL/Carefree AZ
Posts: 786
Likes: 0
Received 8 Likes
on
3 Posts
This is SICK! I first saw your car on mydomain and then headed to driver to find you. You are right. Way more info on 350z. Most people over hear on only interested in Volks and BBK's. Wish I had the cash flow to do a build like this. Family and military job just won't cut it, lol.
Keep up the work. I'm reading through the 1000's of post over on my350
Keep up the work. I'm reading through the 1000's of post over on my350
Thanks for checking my thread out
#111
#113
Hey XKR, hope you don't mind me stealing your thread to advertise for the airstrip event. Folks this is going to be a spectacle, since I'm gonna whoop this 1000 whp car in my 500 whp 5AT!
(Cross Post From Original Event Thread - Click Here to Comment)
The ZdayZ Airstrip Event IS ON!!!
* Sponsored and Organized by Forged Performance *
Who wants to take on an award winning GTR from Forged Performance?
All Zs, Gs, GTRs WELCOME! There will be two classes: Naturally Aspirated and Forced Induction
DATE: May 20th 10 am to 4 pm *rain or shine
LOCATION: Hendersonville Airstrip (http://www.hendersonvilleairport.com/), approximately 80 miles from ZdayZ HQ (www.zdayz.com)
REQUIREMENTS: helmet, jeans/long pants, waiver/signatures as required by sponsor and/or insurance co.
COST: $120 per driver (Click here to send in payment and reserve your spot on the runway. PM Decker@Forged with any questions).
REFUNDS: None (not even for weather, just too unpredictable as we have learned).
FORMAT: Roll on races, continously for hours! Photoshoot to follow (clean cars please - car wash in nearby town). Bring your own food, drink and portable seating as you deem necessary. Caravan to ZdayZ afterwards.
SPONSORS encouraged to PM Sharif@Forged if you would like to support the event. Every bit will help to turn this into a grander spectacle!
PAYMENT REQUIRED TO GUARANTEE YOUR SPOT BUT PLEASE ALSO POST BELOW AFTER YOU REGISTER AND INDICATE YOUR SET UP TO HELP THE ORGANIZERS!
CLICK HERE TO SEND IN PAYMENT AND GUARANTEE YOUR SPOT!
SPECTATORS can attend for no charge, but parking will be limited so try to arrange to get a ride - car pooling would be best.
(Cross Post From Main Event Thread - Click Here to Comment)
(Cross Post From Original Event Thread - Click Here to Comment)
The ZdayZ Airstrip Event IS ON!!!
* Sponsored and Organized by Forged Performance *
Who wants to take on an award winning GTR from Forged Performance?
All Zs, Gs, GTRs WELCOME! There will be two classes: Naturally Aspirated and Forced Induction
DATE: May 20th 10 am to 4 pm *rain or shine
LOCATION: Hendersonville Airstrip (http://www.hendersonvilleairport.com/), approximately 80 miles from ZdayZ HQ (www.zdayz.com)
REQUIREMENTS: helmet, jeans/long pants, waiver/signatures as required by sponsor and/or insurance co.
COST: $120 per driver (Click here to send in payment and reserve your spot on the runway. PM Decker@Forged with any questions).
REFUNDS: None (not even for weather, just too unpredictable as we have learned).
FORMAT: Roll on races, continously for hours! Photoshoot to follow (clean cars please - car wash in nearby town). Bring your own food, drink and portable seating as you deem necessary. Caravan to ZdayZ afterwards.
SPONSORS encouraged to PM Sharif@Forged if you would like to support the event. Every bit will help to turn this into a grander spectacle!
PAYMENT REQUIRED TO GUARANTEE YOUR SPOT BUT PLEASE ALSO POST BELOW AFTER YOU REGISTER AND INDICATE YOUR SET UP TO HELP THE ORGANIZERS!
CLICK HERE TO SEND IN PAYMENT AND GUARANTEE YOUR SPOT!
SPECTATORS can attend for no charge, but parking will be limited so try to arrange to get a ride - car pooling would be best.
(Cross Post From Main Event Thread - Click Here to Comment)
Last edited by rcdash; 05-03-2010 at 07:48 PM.
#115
Guest
Posts: n/a
How is ASAA and what are they doing for you? A shop that was working on my car called one of those guys over to finish mine up... just did the gauge pod and some various electrical. No complaints, at the time I had no idea who they were, why they were called, and the reasoning (ended up getting the car finished elsewhere). This is the only other time I've heard the name in almost 4 years.
#116