anyone have an info on this? heard it was more of a complete kit then the turbonetics, and that it was overall a great twin turbo... any dyno or vids or info at all wud help thanks

 

For someone who has been a member since 2008...seriously?

https://g35driver.com/forums/forced-...ion-noobs.html

 

It just never stops.

 

i believe the first person who replied has been a member since 08 atleast thats wat it says, and 2nd new to fi or not i read that thread and like i said in my thread im lookin for sum ppl who have it done to there car and have vids or piks i can read info or specs all day but that doesnt do anyone justice without personal experiences...

 

You'll get a much faster and more detailed response if you post your question on my350z.

http://my350z.com/forum/forced-induction-182/

 

All you have to do is SEARCH!!!!!!

See...

took 2 seconds

Nice JWT TT build

 

.... You mean

 

What he is trying to tell you is JWT kits are old news and that there is TONS of info to be found if you search....

 

Better yet, PM your question to Alberto, I'm pretty sure he has the jim wolf turbo kit.

I'm really trying to help him out...

 

I second this suggestion.

 

Lol.....Alberto would love that....someone should send this to both Alberto and Doug

 

thanks fellas

 

Where the F*#% is Doug I havent seen him around.


OP i have a JWT TT kit i have had the 530bb kit and now the 850bb kit. The 530 kit was sweet it felt like stock but with much more power. The only issue was it didn't leave much room to grow when I wanted more power on built my block. If i were to do it again I would buy the JWT 700bb kit and upgrade to the 255lph right from the start, it will save money and give you room to grow if you ever want more power.

I don't have much for vids the first one is with the 530bb kit.


<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/Cm-vyfdhUx4&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Cm-vyfdhUx4&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

I am not sure if this link works it won't on mymac but I think it should on PCs its a dyno run with the 530bb kit


http://www.lightspeedinnovations.com...d/Dyno%202.wmv



I dont know what you want for vids here are a few of mine from another thread about cams.
Here is a vid with the S1 cams and open dumps i ran it like that for a few days until I had time to get the exhaust mated with the custom down pipes. I don't have any vids with the C2s yet ...I lied I have a dyno vid i will see if I can find it.





Here it is on the dyno with the C2s and a full exhaust you can hear the idle after the run its the best I can do for you right now!

 

Sylvan, when you get the car back in shape, I'd be very interested to know how the 850bb turbos perform with the stock IC setup... If I ever do a refresh, I've been debating whether I should put in a different compressor wheel - GT2871 or GT30... My turbos seem to leak a tiny bit of oil into the intake piping every so often (not enough to measure, but enough to see in the charge pipe) so I might just move to new 850bbs (though there is no guarantee that new turbos won't fail or leak either).

 

wen u guys build up ur motor with this jwt twin t wat did u typically build parts wise cost wise?