Forced Induction Discussion of turbos , superchargers , and nitrous upgrades on the G35

rebuild of Turbonectics with a Garrett

Old May 17, 2010 | 12:41 PM
  #16  
Slomo Corey's Avatar
Registered User
Joined: Oct 2009
Posts: 32
Likes: 0
Dyno Results:

393WHP @ 5.5psi (First Computer shot)
418WHP @ 8psi (close up computer shot)

the 8psi run was running lean and didn't make as much as it should.

We put a larger turbo on this and is making great power per lb of boost. I see this all the time on larger turbo upgrades. Our turbos make power!! This turbo is a Garrett T3/60-1 w/ a upgraded stage 5 wheel in it.

Corey
 
Reply
Old May 17, 2010 | 08:34 PM
  #17  
g-adabout's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Mar 2005
Posts: 4,454
Likes: 30
From: Pickerington, Ohio
Thanks for the back up Corey!
 
Reply
Old May 18, 2010 | 12:02 PM
  #18  
Andrei's Avatar
Registered User
iTrader: (12)
Joined: Jan 2008
Posts: 2,771
Likes: 21
From: Lawrenceville, GA
Originally Posted by Slomo Corey
Dyno Results:

393WHP @ 5.5psi (First Computer shot)
418WHP @ 8psi (close up computer shot)

the 8psi run was running lean and didn't make as much as it should.

We put a larger turbo on this and is making great power per lb of boost. I see this all the time on larger turbo upgrades. Our turbos make power!! This turbo is a Garrett T3/60-1 w/ a upgraded stage 5 wheel in it.

Corey
Good numbers at low psi.
 
Reply
Old May 18, 2010 | 12:07 PM
  #19  
Jay'Z's Avatar
Registered User
iTrader: (3)
Joined: Apr 2010
Posts: 500
Likes: 0
From: Carbon Fiber, TX
GL wit the new setup....
 
Reply
Old May 18, 2010 | 03:35 PM
  #20  
g-adabout's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Mar 2005
Posts: 4,454
Likes: 30
From: Pickerington, Ohio
Thanks guys!
 
Reply
Old Aug 31, 2010 | 01:53 PM
  #21  
tiguy99's Avatar
Registered User
iTrader: (2)
Joined: Feb 2007
Posts: 4,315
Likes: 30
From: Chicago
Are there any other videos out there of your car in action? It looks great by the way!
 
Reply
Old Aug 31, 2010 | 03:30 PM
  #22  
g-adabout's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Mar 2005
Posts: 4,454
Likes: 30
From: Pickerington, Ohio
Thanks! there are a few when it was on the turbonectics...only one with the Garrett.

What kind of actions are you looking for? I can possibly stage some and post up...
 
Reply
Old Sep 14, 2010 | 04:33 AM
  #23  
Shocka82's Avatar
Registered User
Joined: Jun 2010
Posts: 47
Likes: 0
Please tell me how you achieved 375whp @ 5.5psi! I would love to learn how. I have an Auto but even @ 8psi, I only am able to muster 358 on the Dyno. Was that the old Turbonetics kit before the modifications were done and sold to Treadstone???? I have the Single turbo from there and it puts out pretty well so far.
 
Reply
Old Sep 14, 2010 | 09:57 AM
  #24  
djamps's Avatar
Registered User
iTrader: (8)
Joined: Dec 2008
Posts: 3,602
Likes: 75
From: Annapolis, MD
Depending on the type of dyno 375 is doable @5.5psi. Mine does about 22whp per PSI of boost on a dynojet. With my 240whp baseline 5.5psi makes me about 361whp. With different run conditions, different tuning, different dynos, ect. 375 isn't too far off.
 
Reply
Old Sep 14, 2010 | 03:21 PM
  #25  
g-adabout's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Mar 2005
Posts: 4,454
Likes: 30
From: Pickerington, Ohio
Originally Posted by Shocka82
Please tell me how you achieved 375whp @ 5.5psi! I would love to learn how. I have an Auto but even @ 8psi, I only am able to muster 358 on the Dyno. Was that the old Turbonetics kit before the modifications were done and sold to Treadstone???? I have the Single turbo from there and it puts out pretty well so far.
The turbonetics kit was from 2007 so that might answer the question.

As for my kit now, with the garrett T3/60-1 with stage 5 internals, it spools faster and creates (IMO) more consistant pressure than the turbonectics turbo.

As for the dyno, I was on a dynopack, early spring in ohio, around March, temperatures hovering in the 60-70s, during the day. Humidity is low that time of year here.

Even with the same kit before the Garrett I was able to acheive 375whp/361wtq @6lbs of boost. The swapout is where the gains came and of course, the tune! (same tune as before, UpRev!)
 
Reply
Old Sep 15, 2010 | 12:14 PM
  #26  
tiguy99's Avatar
Registered User
iTrader: (2)
Joined: Feb 2007
Posts: 4,315
Likes: 30
From: Chicago
Originally Posted by g-adabout
Thanks! there are a few when it was on the turbonectics...only one with the Garrett.

What kind of actions are you looking for? I can possibly stage some and post up...
I was thinking like a drive by clip where someone outside is holding the camera and you're driving. That way we can bear you bov!

Also maybe an in car video clip and finally one like an exhaust clip or something
 
Reply
Old Sep 15, 2010 | 03:32 PM
  #27  
g-adabout's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Mar 2005
Posts: 4,454
Likes: 30
From: Pickerington, Ohio
I just did a photoshoot last Sunday. I didnt get any vids but found some good places to shoot with the BOV, Exhaust sounding good (both through the HKS and through the Cut out).
Hopefully I will get it together soon.
 
Reply
Old Sep 15, 2010 | 08:34 PM
  #28  
tiguy99's Avatar
Registered User
iTrader: (2)
Joined: Feb 2007
Posts: 4,315
Likes: 30
From: Chicago
Nice! I can't wait to see what you come up with
 
Reply
Old Sep 27, 2010 | 08:37 PM
  #29  
g-adabout's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Mar 2005
Posts: 4,454
Likes: 30
From: Pickerington, Ohio
https://g35driver.com/forums/ohio-g-...enia-ohio.html

here is a link of my G at the track... check it out!
 
Reply
Old Sep 27, 2010 | 10:33 PM
  #30  
tiguy99's Avatar
Registered User
iTrader: (2)
Joined: Feb 2007
Posts: 4,315
Likes: 30
From: Chicago
Gonna check these out soon as I get home from the grocery store!
 
Reply

Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 06:23 PM.