sick build!

 

This thread is pure win, subscribed. Are you going to put the Stoptech logo back on the calipers?

 

I bought the stickers but now i think i like it better without.

 

BIG *****!

I wish mine were as big.

Most I've done is intake, TB, fuel rail...and that was on my '97 grand am. I don't touch the G with a 10 foot pole!

 

You, sir, are a champ.

Anymore I refuse to pull a motor without use of a lift and let alone a garage. You must be terribly organized or your old lady is standing by with a sharpie, labels, and bags.

I'm going to keep an eye on this thread, I'd like to see the power you end up making and how long it takes you to do it.

 

It does suck doing this without a lift but i have to do what i can. On a side note i got a bunch of parts this week and will post pics later.

 

So i worked on the leather this weekend. Here are some pictures.

 

I thought the parking lot engine pull was gangsta, or the motor in the kitchen, but man u even did ur own interior. That is great! By far one of if not the best build story I've read thus far..

Good luck, keep at it!

 

No sleeves?

 

You talking about the block?

 

Yes

 

Nope just bored out to 97mm

 

So the wrinkles in the ends of the seat were bothering me so i took the leather back off and i guess i was tired or something because i missed an entire spot were it need to be secured down. It looks much better now.

 

So what did you do? combine and 03&05 up cluster, I have never heard anyone swap in an 05 and up and not lose the auto HL and the window crack deal? Something to do with the door pins seeing different voltage or resistance

 

I dont know what to tell you man it all works. It is a straight up 05 cluster. I had both the 03 and 05 wiring diagrams opened at the same time and made a crossover harness.