G35 Stroker Build
#77
#78
Registered User
iTrader: (37)
Good to hear, shouldnt be long now once I got my block done it only took me a week end to get it running again I had a buddy help set the timing and a couple guys help with my tranny other than that it was pretty much by myself. So hopefully you can get it going soon. I cant wait to see your results
![Biggthumpup](https://g35driver.com/forums/images/smilies/biggthumpup.gif)
#80
Registered User
iTrader: (37)
The PC looks awesome!! If I did it myself I would over kill it for sure and 1/2 my car would PCed....
Eliminate that one idler pulley, I dont have any good pictures with the belts on (power steering missing in this pic as well but the bracket is there) but the alternator/Power steering side has the one idler pulley that is useless, I made a spacer because the one bracket goes behind the PS bracket but some people just cut the corner off the idler bracket and use it.
Eliminate that one idler pulley, I dont have any good pictures with the belts on (power steering missing in this pic as well but the bracket is there) but the alternator/Power steering side has the one idler pulley that is useless, I made a spacer because the one bracket goes behind the PS bracket but some people just cut the corner off the idler bracket and use it.
![Name: IMG_3316.jpg
Views: 143
Size: 170.0 KB](https://g35driver.com/forums/attachments/forced-induction/241578d1501885145-g35-stroker-build-img_3316.jpg)
#81
#82
Registered User
iTrader: (37)
Ya I got a smaller belt, I just cut an old belt laid in on an measured it then went and picked up the right size. My ATI dampener was a different size than stock so I needed new belts anyway.
I got the timing cover bolts at Fastenall most fastener shops should have them. Search "rryde" his engine bay thread he lists all of the different sizes you need and I think a few guys tell you where they got theirs.....I huge time saver having the sizes figured our for you
![Biggthumpup](https://g35driver.com/forums/images/smilies/biggthumpup.gif)
![Embarrassment](https://g35driver.com/forums/images/smilies/redface.gif)
#84
#85
Ya I got a smaller belt, I just cut an old belt laid in on an measured it then went and picked up the right size. My ATI dampener was a different size than stock so I needed new belts anyway.
I got the timing cover bolts at Fastenall most fastener shops should have them. Search "rryde" his engine bay thread he lists all of the different sizes you need and I think a few guys tell you where they got theirs.....I huge time saver having the sizes figured our for you
I did it the hard way.![Embarrassment](https://g35driver.com/forums/images/smilies/redface.gif)
I got the timing cover bolts at Fastenall most fastener shops should have them. Search "rryde" his engine bay thread he lists all of the different sizes you need and I think a few guys tell you where they got theirs.....I huge time saver having the sizes figured our for you
![Biggthumpup](https://g35driver.com/forums/images/smilies/biggthumpup.gif)
![Embarrassment](https://g35driver.com/forums/images/smilies/redface.gif)
#90