here's the problem. I cant really get that one pipe to fit right so I will need to hear from someone who actually installed the kit before. Does that pipe go in between that thick ac line and the chassis or is it in the right place? would be nice to see some pictures if there's any. Thanks! here's my pic btw

 

you're off by an inch or so...the pipe needs to be a little further back. the top of the pipe should be sandwiched between the AC line (you can bend it a bit, btw) and the shock tower.

 

bend the ac line at the cylinder shape part?

 

just after the cylinder and above at where it comes out of the brake compartment. it will always be a snug fit, but you can massage it a bit.

 

Strafespeed intake pipe for the vortech system should speed your process up a bit =]

 

looks like the pipe coming off the TB has been modified/cut. It may be part of your problem.

 

+1, randy's intake speeds up install as well as R & D time

OP, the offer I pm'd you still stands. let me know man.

 

+1 op.. Either way your vortech pipe from strafe will ship out tomorrow via usps

 

After the cylinder as in on the compressor side and not on the flexible hose side am I right?

 

yea my brother was having TOO much fun with the install. I'm gonna pick up a strafe vortech pipe anyways.

 

See you soon

 

no, on the hose side. you can bend things just a bit for added clearance...will show you this evening when we catch up.