Not yet . Vortech is looking for a 06 G35 to test fit a kit on it . Not sure if its the old set up or a new one . They are going to give a discount on the kit and I would think free install to who ever takes them up on it . Call Vortech or Derek at DSport mag. if interested

 

Booger -03 G35 AT5
Urban - 04 G35 AT5
Mean Gene - 03 G35 AT5
UMG35 - 04 G35 6sp
BeerViper - 04 G35c 6MT
kzanard - 04 G35c 6mt
newg35driver-05 G35c AT5

 

Little update...Vortech's now looking for an 06 350Z. Once they get the stock 06 G and Z in their to R&D they'll let me know if it's even going to be possible to fit a bigger blower and cog setup in my car. So as soon as I hear back from Vortech I'll let you guys know.

Thanks,
Derek
-DSport

 

Thanks Derek

 

Booger -03 G35 AT5
Urban - 04 G35 AT5
Mean Gene - 03 G35 AT5
UMG35 - 04 G35 6sp
BeerViper - 04 G35c 6MT
kzanard - 04 G35c 6mt
newg35driver-05 G35c AT5
lastsongforagirl-03c 6mt

 

it would be nice if vortech ever made a kit to fit the "rev-up" motors.

 

they are....soon

 

Booger -03 G35 AT5
Urban - 04 G35 AT5
Mean Gene - 03 G35 AT5
UMG35 - 04 G35 6sp
BeerViper - 04 G35c 6MT
kzanard - 04 G35c 6mt
newg35driver-05 G35c AT5
lastsongforagirl-03c 6mt
jsal - 03 G35c AT5

 

Is slipping the gargling sound that the Vortech makes during idle???
My vortech gargles alot at idle.
So by tightening the belt...it will get rid of this gargle noise?

 

No...the gargling noise you here , is the gears in the blower . To keep the boost building in the upper rpm range for guys that are pushing the system to 9psi and above , the belt needs to be really tight . We are hoping for a cog belt set up so we dont have to run that serp belt so tight . Running the serp belt tight all the time , ends up making the bearings in the pulleys go bad .

 

Oh ok never mind.
I'm on 7psi.
Anyway to get that gargle sound to lessen?

 

I just had the dealer raise my idle to 800 RPM ... voila no more idle gargle!

 

very very very simple and easy answer.
THANKS!!!

 

Can they raise the idle when they tuune the ss box? or do i have to go to the dealer?

 

It's a Nissan diagnostic tool used to set idle speed so tuning the SS won't touch that. It only takes the dealer 2 minutes to adjust the idle ... plug the diagnostic tool under the drivers dash, click the idle up a few notches, click update and that's it.

Unless your tuner has the Nissan diagnostic box I don't think they can do it.