Forced Induction Discussion of turbos , superchargers , and nitrous upgrades on the G35

No Gauge's with SC Install - Bad?

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 01-23-2006 | 08:47 PM
Dan_K's Avatar
Thread Starter
|
Registered User
iTrader: (8)
Joined: Jan 2005
Posts: 1,471
Likes: 0
No Gauge's with SC Install - Bad?

I know a couple people on here who don't have any gauge's with their Vortech. I was just posting this thread to see how safe it was to do that. If I get the Vortech tuned well, could I get by without installing any Boost, AF and EGT gauges? For about 6 months after the install? Thanks.
 
  #2  
Old 01-23-2006 | 08:58 PM
Down_Shift's Avatar
Registered User
iTrader: (19)
Joined: Dec 2004
Posts: 2,178
Likes: 1
From: Beantown, MA
Tuned well.. without gauges?..

They are that not expensive.. 600-700 bucks can you get a nice set. I would not suggest skipping the gauges.
 
  #3  
Old 01-23-2006 | 09:18 PM
Dan_K's Avatar
Thread Starter
|
Registered User
iTrader: (8)
Joined: Jan 2005
Posts: 1,471
Likes: 0
You can't tune without gauges? Doesn't the computer tell you all the info you need when tuning?
 
  #4  
Old 01-23-2006 | 09:34 PM
bullitproof's Avatar
Registered User
iTrader: (1)
Joined: Aug 2005
Posts: 371
Likes: 0
From: The First State
Overboost or lean condition means car goes boom. get guages. you don't need the most expensive, just good quality.
 
  #5  
Old 01-24-2006 | 12:04 AM
Dan_K's Avatar
Thread Starter
|
Registered User
iTrader: (8)
Joined: Jan 2005
Posts: 1,471
Likes: 0
I thought the Vortech was pretty reliable. So I guess those guys w/out gauges are asking for trouble?

Is the Zeitronix expensive if I just want A/F and Boost? I want something simple and just one display for everything. What do you guys suggest.
 
  #6  
Old 01-24-2006 | 12:31 AM
g8tor20's Avatar
FGC's official flip flopper
iTrader: (5)
Joined: Nov 2004
Posts: 3,387
Likes: 0
From: Jupiter, FL
Originally Posted by Dan_K
I thought the Vortech was pretty reliable. So I guess those guys w/out gauges are asking for trouble?

Is the Zeitronix expensive if I just want A/F and Boost? I want something simple and just one display for everything. What do you guys suggest.
i like my zeitronix. I paid about $500 + install but i got the egt sensor too (might as well since the display shows it...id rather see the EGT than a "0" all the time. Dude..if you are running FI, spend the few bucks to get the gauages. Its not needed, but i couldnt imagine hitting boost without them...

Also...i too was concerned with a simple look. I bought a clip from Baileyrx and his clip is awesome. Just search for it and if not...ill post a pic. Pretty cool
 
  #7  
Old 01-24-2006 | 03:00 AM
Dan_K's Avatar
Thread Starter
|
Registered User
iTrader: (8)
Joined: Jan 2005
Posts: 1,471
Likes: 0
I think Randy was also running no gauges. I might be wrong. Since I saw a few ppl with no gauges, I thought it would be ok. I would understand why you need them for Turbo for sure.

g8tor20, how did you get A/F, boost and EGT for $500? I went to the website and it said just the A/F with display and Boost comes out to a little over $500.
 
  #8  
Old 01-24-2006 | 03:11 AM
urban's Avatar
Registered User
iTrader: (29)
Joined: Jan 2004
Posts: 3,744
Likes: 72
From: California
Been running 31,000 miles with the vortech without gauges even though I have them sitting here.
just get it tuned at a good shop and you will be fine....don't beleive all the hype, as long as it is dyno tuned correctly you will be fine.

Of course I intend to get mine installed soon but only when I get the T trim installed.
 
  #9  
Old 01-24-2006 | 03:14 AM
Dan_K's Avatar
Thread Starter
|
Registered User
iTrader: (8)
Joined: Jan 2005
Posts: 1,471
Likes: 0
^I knew some ppl here didn't run gauges. Out of curiosity, why didn't you get gauges in the beginning? I plan on getting it tuned a SFR, so it should be pretty stable.
 
  #10  
Old 01-24-2006 | 03:18 AM
urban's Avatar
Registered User
iTrader: (29)
Joined: Jan 2004
Posts: 3,744
Likes: 72
From: California
Simple, I did not want to have that ugly pillar pod you see on all the other ricer cars around town, I wanted to have a custom gauge holder built and I am working on that right now.

Now on my TT car I have fuel pressure,water temp, oil pressure, egt, boost and AF but that is because on a turbo car you can get boost spikes and turbo systems are always finicky to deal with.
 
  #11  
Old 01-24-2006 | 07:48 AM
tekknikal's Avatar
Registered User
Joined: Jan 2003
Posts: 971
Likes: 1
From: Caribbean
i would definitely not run without them
 
  #12  
Old 01-24-2006 | 12:51 PM
ScottR's Avatar
Registered User
iTrader: (2)
Joined: Mar 2005
Posts: 624
Likes: 0
From: Birmingham, AL
I was concerned by this too, AAM told me once it's tuned it's tuned and that allot of people don't use guages at all. I ended up going with the HKS navigator on my set-up which reads most vitals it's small and is tucked away so it doesn't stick out and give you the "ricer" look. I had them mount it in the Nav. cubby so I can close it when I don't need anyone else to see it . However I will probably end up adding an external Wideband A/F, boost and EGT in the small glove box pretty soon just to maintain the sleeper thing.
 
  #13  
Old 01-25-2006 | 04:50 PM
Brando's Avatar
Registered User
iTrader: (1)
Joined: Apr 2004
Posts: 1,860
Likes: 3
From: GA
Cool

I can't imagine running FI without being able to keep an eye on A/F....

I am happy w my Zeitronix!
 
Attached Thumbnails No Gauge's with SC Install - Bad?-zeitronix.jpg  
  #14  
Old 01-25-2006 | 05:58 PM
BlackStevo8's Avatar
Banned
iTrader: (1)
Joined: Oct 2005
Posts: 599
Likes: 0
From: Long Island, NY
I hate the idea of gauges in the G35, no where to put them clean. A pillars are ricey, and i'm not a fan of drilling. I like clean OEM looking things. I love the Zeitronix above, thats good but wouldnt work in my car uz I have NAVI the only thing i'd ever want is a wideband
 
  #15  
Old 01-25-2006 | 06:12 PM
g8tor20's Avatar
FGC's official flip flopper
iTrader: (5)
Joined: Nov 2004
Posts: 3,387
Likes: 0
From: Jupiter, FL
No problem man. I to ohave Navi. I just installed my Zeitronix useing Bailyrx's clip that he makes. Awesome and works perfectly. Check out post #18

https://g35driver.com/forums/showthr...ight=zeitronix
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: No Gauge's with SC Install - Bad?



All times are GMT -4. The time now is 02:27 PM.