Does anyone have any idea where i can find some installation guides for the ccfl angel eye kit for my 03 G35 sedan? I bought the kit from this guy there was no instructions in it whatsoever. Please help...

 

Start here:
https://g35driver.com/forums/lightin...ple-steps.html

 

Sedan and coupe install are almost the same. I have done a number of both.

 

advancedautomotiveconcepts.com may be able to help they specialize in angel/demon eyes for various applications

 

That Head light removal step by step tutorial
now that i know how to get the head light out
how do i install the angel eyes in?
where do they plug in?

 

Anyone know where the two wires fo the angel eyes would be getting plugged into?

 

Ground (black) is always ground. One of the wires on the headlight will be ground for all the other lights as well; connect it to that one. Power connection point depends on how you want the halos to work. I have mine running to a relay that's powered by both the ACC to turn on whenever the car is on, and the running lights, to stay on at night when the headlights are on after the engine is shut down. You will need to use a couple of diodes if you want to power from two different sources. A simpler way is just to power them from the power to the clearance strip light along the side. They will only go on when the headlight is on though.

 

I think I want them on all the time. Once the headlights are on can you still see the angel eyes. Im just wonderin. For the angel eyes. what kind of glue do you recoment for the install. Is there a special type of glue out there?

 

They still them for $200!! lol rip off

 

I hope you mean all the time the car is turned on. Yes, you can see the angel/demon eyes when the headlights are off. I used clear 5 minute epoxy to mount mine. Just enough to hold them on opposite points.

 

Got my AAC 10k demon eyes for $150 full kit, customer service suck's IMO.

 

thanks for the info