Hey guys im looking at these rims for my g35 coupe what offset would you recommended for a nice flush set up? I'm not lowered ATM but plan on going with coil over soon.

http://www.elementwheels.com/proddet...rc10blkmch2011

Front: 20x9 15 or 35 offset?

Rear 20x11 10 20 or 28 offset?

Or should i go 20x10 40 0ffset? 40 will look sunken right?

Let me know what would work best for a coupe thx.

 

Roll your rear fenders.

20x9 +15 and 20x11 +10

 

20x10 all around low teens offset.

or 20x9 +15 and 20x11 +10 for staggered

 

is 20x9 +15 fine for the front or is gonna look past the fender? also 20x11 +10 ill need rear fender rolled for sure right? What about 20x11 +20 how is that going to look would it need fender work too?thanks in advance

 

9 +15 would be alright. Plus you aint dropped yet so that should be close to flush. but if you drop your car you might wanna go lower offset. For the rear it aint that aggressive so you should be fine. Depending on what tire size you get would determine the fender work. But I would just roll em anyway assuming that uour gna drop your car.

 

So for an aggressive look i should go with 20x9 +15 and 20x11+10 ? thanks and for the tires 245/35/20 & 275/30/20? or 255/35/20 & 285/30/20? what you guys think?

 

With a coupe I'd go with the 20X9 (F) & 20X10 (R) with low teen offsets. The 245s & 275s will work fine with this set up and you won't need spacers....Gary

 

dont the type of wheels really make a diff. with offsets...for example my volks are +15 front and at stock height they stick out pretty far, my rears are +24 and they also poke out at stock ride height..when lowered on sportlines they settled right to flush with the fenders..

 

20x9 +15 up front will NOT be flush.
I'm running a 19x9.5 +12 up front and i'm still not flush in front (dropped on Z stechs).
I will probably put on 10 or 15mm spacers to be flush.
This is a good thread to get all ur ques answered.
https://g35driver.com/forums/wheels-...-ask-here.html

Update- This all depends of course on what tires sizes you'll be running & how low ur looking to go.
Once u decide those 2 factors then u can decide how flush you can have the wheels without rubbing.

 

why dont u recommend 20x11 gary too wide for our cars? Thanks

 

I just found this page its not the same style rim but same company and looks like 20x11+10 would looks pretty flush that's what the black G its running .

Based on this pics i think 20x9 +15 and 20x11+10 would looks good what u guys think?

http://rohanawheels.com/?page_id=106

BTW any1 recognizes whose G its that? Thanks

 

This might help!

http://www.rimtuck.com/

 

that looks a lil more than flush. you need to consider also that he is dropped. on your car at stock height with that width and offset its gna stick out a lot more. and if you do decide to drop id recommend a minor stretch on the tires atleast and a fender roll to get a good fittment.