UPDATEs ON MY CAR!!& HELP ON MY GT-7!!PICs**
Wats the offset?.....your offset is probably too low ....you should also consider going back to the stock wheels its looking kinda dangerous there
Last edited by lexluger180; Jul 28, 2006 at 11:52 AM.
Originally Posted by da mayor
what offset is the wheel? if you had time i would say stop by the dealership i'd try to help you out
ur dealer is like 40 miles away from me....hmmmm
went back to my bodyshop they roll the fender for me...i guess im not rubb anymore... but im still not 100% sure if its not rubbing,i just dont hear the rubbing "bump bump" sound anymore...thanks guys for helping me out~now..lets set up a mini meet?
Registered User
Joined: May 2005
Posts: 492
Likes: 2
From: Newark/ Harrison, NJ
Hey, first off, roll your fenders!!! And second, you need a camber and toe kit, specifically the SPC kit. Without the kit, your rims/tires are going inside the fender and getting chewed the **** up. Also, like someone mentioned before, you have a stock 03 suspension I believe. I'll almost bet that your springs aren't exactly new!!! They most likely lost alot of there stiffness and therefore, whenever you hit a pothole or anything else, they tend not to absorb it as well. Either way, first, I would go with a SPC camber and toe kit. If that doesn't work, then do the fender roll. Even if the kit does work by itself, you should still do the fender roll. And finally, even if my rims weren't rubbing, I'd get some new springs or coilovers. The good thing about coilovers is, you could adjust ride height and damper. Anyway, hope that helps. And if you want, buy it and bring it to my BBQ/DIY so I could help you put it on. I think Neal is buying a SPC kit also and putting it on that day. Talk to him. That's Neal376...
Go ahead and roll them. I had to get mine rolled also. The same thing was happening to my car whenever I hit a small bump. The tires have the same marks in them. After I got them rolled that took care of the problem. Even though the guy told me still dont put any fat people in the back seat.
I porbaby wouldnt cut them. I have heard some people talk about rusting due to cutting.
The car looks SICK IMO. You did a good job.
I porbaby wouldnt cut them. I have heard some people talk about rusting due to cutting.
The car looks SICK IMO. You did a good job.
Thread
Thread Starter
Forum
Replies
Last Post
