So i Bough these 8000K JDM D2s Bulbs for my car and all of a sudden in 2 weeks they went dead so i email the guy whom i bough it from and he said that "I think you should upgrade your headlight fuse to 20mA in order to make sure the JDM HID bulbs can work properly.

The chance of both bulbs been disfunctional is very low, so please check your fuse box first."

Now first of all where is the fuse box is there another way and would infiniti care if i changed the fues?

 

Do not change your fuse Amperage. It has been designed to work that way with that specific gauge of wire. if you put a 20 Amp fuse your wiring will get hotter and may not be designed to work at 20 amps, which could result in an electrical fire which would not be covered by the warranty...all because of a crappy little fuse. This of course is a worst case scenario...but why risk it?!

 

Fuse box location is detailed in the owners manual, search this site.

Search engine is your friend.

Check your fuse. If the fuse is blown, replace it with a fuse of the same amperage rating. Do not put a fuse in that has a larger amperage value.
Check the bulbs to make sure they are properly seated in the bulb socket.
Good luck.

Use spell check and google "run on sentences".
Reading your post hurt my eyes this morning, lol.

 

alright thanks but yesterday i slaped on my stock 4300 cuz i had to go out at night and they seemed to work fine so the fuse cant be blown can it?