ok i did my first oil change on my 05AT the first thing is that dam cover you have to remove all those dam bolts so before i did i remove the bolts i seen a sqare hole and i could get to the oil plug but the oil filter was doable but it would GET OIL all over the cover so i broke out the cutting tool and expanded the whole and the oil change went perfect i used amsoil 5w 30 and i also replaced my air filter with the amsiol filter and let me tell you i can feel a differnce in how she pulls. then again the old air filter looked like charcol.

i also sprayed dyno matt in the front wheel wells to try to dead the tire roar it helped a little i theink i need like 2 more coats

BUT THERE IS A PROBLEM MY LOW TIRE LIGHT IS ON AND THE TIRES ARE FINE WHAT GIVES HERE

 

one or more of your tps(tire pressure sensors) are bad if your still under warranty take it to the dealer
if not there are a couple of them for sale on this web site

 

Check your tire pressure. If the tire pressures are all good and the LTPS still comes on; then you'll need your LTPS re-initialized.

 

Check your pressure when its DEAD COLD! There is not much change between TPS on and off. (2-4) psi. These tires change a lot between hot and cold. NEVER check them hot! I noticed that it can change 1 to 1.5 psi just on the side in the SUN!

 

......+1, or they may need to be reinitialized (by the dealer).
C.

 

check for a nail in ur tires too