Hey! So... im sitting here sanding my grill... and its taking FOREVER to sand all the way down to the black plastic. Is it even necessary to sand that far down if im going to be using black primer? THanks!

 

its a good thing if you do... you'll get a better outcome at the end man trust me... patience is key while sanding

 

ive been sanding for an hour straight at a furious rate, and there is no way in hell I can get all the way to the black... ill just try to sand the clear coat off, and if it doesnt turn out good, Ill just buy some paint stripper

 

fyi, the plastic isn't black its whiteish.

 

Oh.. hmm well getting to black is hard enough so **** that!! lol.. i got the primer on already

 

i used paint stripper... it was much easier..

 

^you mean Jesus used paint stripper

now stop putting rock chips in HIS Grill

anyway...using the paint stripper is a good idea..but since you already sanded it down your already good to go.

Did you plan on making the grill matt Black or Glossy Black?

 

Instead Of Waisting You Precious Time, Give I To Body Shop To Do, So You Know It Will Come Out Right

 

if you do it right and yourself you just feel better about it, then you can take that extra money and buy a nice bottle of bourbon

 

make sure to post pics on the outcome

 

Its a nice semi-gloss, it looks sweet as ****, let me get a pic with my ghetto cell phone camera!

 

 

what kind of paint did you use?

 

I love it! ya what kind of paint and was it that hard? I would like to do mine also. Thanks

 

I used Krylon paint. Black primer, Semi-Gloss Black, and clear coat finish. I sanded it down with 320 grit, then 1500 grit. Wasnt hard at all.