7440 LED lights for Turn Signals.....
7440 LED lights for Turn Signals.....
http://cgi.ebay.com/ebaymotors/ws/eB...category=33713
I was thinking if this would look nice? Has anybody tried replacing the stock rear turn signal bulbs with LED bulbs? Secondly, whats a good automotive LED bulb manufacturer, that makes odd sizes such as 7440, or 1156, etc.
04 DG Coupe, Prem Package, Aero
I was thinking if this would look nice? Has anybody tried replacing the stock rear turn signal bulbs with LED bulbs? Secondly, whats a good automotive LED bulb manufacturer, that makes odd sizes such as 7440, or 1156, etc.
04 DG Coupe, Prem Package, Aero
Re: 7440 LED lights for Turn Signals.....
If you don't mind having a "hyper blinker" then it would be fine.
By that, I mean it will blink way faster than usual.

Laser Red 6MT Coupe / Delivered by Grubbs Infiniti
By that, I mean it will blink way faster than usual.

Laser Red 6MT Coupe / Delivered by Grubbs Infiniti
Re: 7440 LED lights for Turn Signals.....
Yes I have, and you will need a 6ohm 50watt resistor to make it work right or you will have a very fast blinker. I would also recommend getting a 7443 with at least 11 LED's, because I find that 9 LED's just are not bright enough in the day time, but I'm in sunny Florida.
Re: 7440 LED lights for Turn Signals.....
There are no LED cluster bulbs that currently emit more light than the OEM bulb, if that is what you are thinking, unless instant on/off is your reasoning.
---------------------------------
http://www.anythingbox.net
---------------------------------
http://www.anythingbox.net
Re: 7440 LED lights for Turn Signals.....
Presuming the resister is installed, will the 11 led version fit into the existing rear turn signal opening? How about the front bulbs while we are at it?
I think the instant on-off would complete the picture.
PS: Do you put the resister mentioned at the relay or inline with each bulb?
I think the instant on-off would complete the picture.
PS: Do you put the resister mentioned at the relay or inline with each bulb?
Re: 7440 LED lights for Turn Signals.....
the resistor goes on the binker wire to the ground wire right at the bulb socket.
<P ID="edit"><FONT class="small"><EM>Edited by raysg35 on 11/29/03 08:23 PM.</EM></FONT></P>
<P ID="edit"><FONT class="small"><EM>Edited by raysg35 on 11/29/03 08:23 PM.</EM></FONT></P>
Thread
Thread Starter
Forum
Replies
Last Post
Luisgalvan33
G35 Sedan V35 2003-06
3
Jul 19, 2018 08:16 PM





