to all of you who bought the spacers and mrev2. did you guys install it yourself or you paid a professional to do it?

 

there's a full set of instructions on their website. it's step by step and you can get lots of support from tony. if you can install an intake, i'd say you could install the mrev and spacer, but it will take you some time.

 

its easy to install....not hard at all! Do it yourself and learn while you do it! I have installed two different spacers on my G. Also installed the iso thermal gaskets underneath the lower plenum. I should of done a DIY sticky for everyone since this seems to be a big question....Did you buy the spacer and mrev2 already? If so did you buy it directly from motordyne? If you bought it from them there should be step by step instructions on how to do it! Its really simple

 

It took me about and hour and 1/2 to do the MD 1/2 spacer and removal of the lower plenum to replace the gasket with an Iso thermal one!

 

pretty easy...willing to help if your in NY

 

installed myself. and to help you understand how easy.. im 17 as of November and did it with no problems

get it?

 

installed myself its very easy

 

Installed myself... Just make sure u have a torque wrench...

 

thanks for all the reply. ill be getting it probably in another month or so after i move out.