How much horsepower are you getting out of your G
Banned
Joined: May 2006
Posts: 1,885
Likes: 0
From: Gaithersburg
Originally Posted by Geez35
I'm surprised you didn't post pics, or did I miss it?
Anyway, with those mods I maybe putting out more than 320hp.
Anyway, with those mods I maybe putting out more than 320hp.
Registered User
iTrader: (10)
Joined: Jul 2006
Posts: 3,942
Likes: 7
From: PNW in Washington
6MT Coupe
My base pulls with only a Z-tube and JWT Pop Charger:
232hp/211tq
With my Injen Dual Track Edition Exhaust added:
245hp/224tq
Don't like my A/F in any of these.
Also rolling with 20's with 285/30's on rears in both charts. More rotational mass to get going than oem 19's with 245/40's, so I've heard/read.
232hp/211tq
With my Injen Dual Track Edition Exhaust added:
245hp/224tq
Don't like my A/F in any of these.
Also rolling with 20's with 285/30's on rears in both charts. More rotational mass to get going than oem 19's with 245/40's, so I've heard/read.
Registered User
iTrader: (10)
Joined: Jul 2006
Posts: 3,942
Likes: 7
From: PNW in Washington
6MT Coupe
Yeah...that does seem rather high for just an aftermarket exhaust. Like to see the dyno chart on that one 
I've seen higher numbers than mine, but most of those were not in California.
Cali sticks us with only 91 oct, whereas other states have up to 95 I think, which most likely gives the VQ more power/tq with better numbers.
Plus I'm sure in other states with less stringent emmission standards, their oem chip is factory tuned better for performance than ones for Cali emissions.
I've seen higher numbers than mine, but most of those were not in California.
Cali sticks us with only 91 oct, whereas other states have up to 95 I think, which most likely gives the VQ more power/tq with better numbers.
Plus I'm sure in other states with less stringent emmission standards, their oem chip is factory tuned better for performance than ones for Cali emissions.
Registered User
Joined: Dec 2006
Posts: 547
Likes: 1
From: SIoux Falls SD
Originally Posted by mr freeze
266whp and 244lbs of trq...mods are 5/16 pleum spacer,injen track editon exhaust,fujita intake and apexi super afc2 controller and a really good tune..
YOu never got me thos safc numbers
Was up?
Registered User
Joined: Dec 2006
Posts: 547
Likes: 1
From: SIoux Falls SD
Originally Posted by Nismo G
hmm same mods as me..different brands though!? I wonder if i was guessing to low with 250whp?
-sean
-sean
can i get some safc tunning numbers?
I jsut need the corection numbers at different RPMs
Thread
Thread Starter
Forum
Replies
Last Post
StreetStandard
Engine-Vendor
117
May 22, 2020 08:21 AM
