Vortech
Re: Vortech
As far as I have seen, Vortech does have an application for the G35, so I'm gonna say yes!
"See, the problem is that God gives men a brain and a *****, but only enough blood to run one at a time."
"See, the problem is that God gives men a brain and a *****, but only enough blood to run one at a time."
Registered User
Joined: Jun 2003
Posts: 760
Likes: 1
Re: Vortech
As far as I know there are currently two of us with the Vortech kit on a G35. I have one on my 6MT Sedan and Dollar99 has one on his 6MT Coupe. I don't think it would fit the 5AT sedan, but I don't know for sure.
I understand that a G35-specific version of the kit with soon be available but in the meantime the 350Z kit can be used with some customizations. Nameley, changes must be made to the mounting of the intake filter, the intercooler piping and (most importantly) to the programming of the timing box that comes with the kit. If your tuner does not have the SplitSecond tuning software, DO NOT attempt the install until the G35-specific kit is available.
--Steve
I understand that a G35-specific version of the kit with soon be available but in the meantime the 350Z kit can be used with some customizations. Nameley, changes must be made to the mounting of the intake filter, the intercooler piping and (most importantly) to the programming of the timing box that comes with the kit. If your tuner does not have the SplitSecond tuning software, DO NOT attempt the install until the G35-specific kit is available.
--Steve
Registered User
Joined: Jun 2003
Posts: 760
Likes: 1
Registered User
Joined: Aug 2003
Posts: 797
Likes: 0
From: Orange County, CA
Re: Vortech
There is no official G35 kit out yet. A few people (zimbo) had a 350 kit retrofitted to his g35 sedan... As of now, my car is and has been at vortech for the past 2 weeks getting fitted with the supercharger, and they will release an official kit based off of my install.
04' G35 / 6MT / Tein Basic Coilovers
Volk 19" GT-7 Gunmetal
04' G35 / 6MT / Tein Basic Coilovers
Volk 19" GT-7 Gunmetal
Registered User
Joined: Jun 2003
Posts: 167
Likes: 0
From: Hacienda Heights, CA
Trending Topics
Registered User
Joined: Nov 2002
Posts: 178
Likes: 0
From: DC Metro
Re: Vortech
I'm putting out 359rwhp and 305 pounds of torque with my Vortech setup. If you live near Charlotte NC, there is a great shop that knows how to do the conversion and tune the piggy back ECU to work with the G.
Registered User
Joined: Aug 2003
Posts: 797
Likes: 0
From: Orange County, CA
Re: Vortech
The wire conversion and air filter won't need to be done after they're done with my car.. should be a few more days...
dollar - how you liking it so far?
04' G35 / 6MT / Tein Basic Coilovers
Volk 19" GT-7 Gunmetal
dollar - how you liking it so far?
04' G35 / 6MT / Tein Basic Coilovers
Volk 19" GT-7 Gunmetal
Registered User
Joined: Jun 2003
Posts: 760
Likes: 1
Re: Vortech
The place in Charlotte is Carolina Performance Racing (www.cprace.com).
BTW, here's my most recent dyno (with Stillen exhaust)... Jimmy's numbers are a little better than this.
--Steve
BTW, here's my most recent dyno (with Stillen exhaust)... Jimmy's numbers are a little better than this.
--Steve
Thread
Thread Starter
Forum
Replies
Last Post
seagrasser
G35 Cars
17
May 3, 2022 09:43 AM
StreetStandard
Engine-Vendor
117
May 22, 2020 08:21 AM
n2fooz
Engine, Drivetrain & Forced-Induction
0
Sep 4, 2015 07:46 PM