JWT popcharger cleaning.
Former G35driver Vendor
iTrader: (93)
Joined: Sep 2004
Posts: 9,524
Likes: 3
From: So. Cali - Rowland Hts
I clean mine when it starts looking ugly =P usually between 3-5k
how you clean it is simple
1. Remove Popcharger
2. use water hose and clean from INSIDE OUT
- so water hose goes inside the filter while the water comes out
3. clean the outside with a brush / cleaner (if u have some)
4. allow filter to FULLY dry before appying the oil
5. DO NOT over oil the filter just alight coat (reason why they're colored) will be fine.. the oil is there to help catch debries and does nothing for the air.. too much and ur going to suck it up and get it on ur MAF SENSOR
6. re-install =)
how you clean it is simple
1. Remove Popcharger
2. use water hose and clean from INSIDE OUT
- so water hose goes inside the filter while the water comes out
3. clean the outside with a brush / cleaner (if u have some)
4. allow filter to FULLY dry before appying the oil
5. DO NOT over oil the filter just alight coat (reason why they're colored) will be fine.. the oil is there to help catch debries and does nothing for the air.. too much and ur going to suck it up and get it on ur MAF SENSOR
6. re-install =)
Thread
Thread Starter
Forum
Replies
Last Post
Freeman186
Engine, Drivetrain & Forced-Induction
1
Sep 6, 2023 10:07 AM
JG_G35
Engine - Intake/Fuel
2
Sep 7, 2015 09:35 PM




