Had a bad day with my G. Took my car in to get it tinted. They were taking out some bubbles at the bottom of the passenger side window with a heat gun. The lady must have spent too long on one spot and burned my door trim (the vinyl part next to the window) and a little bit of the inner door seal. Now I have to get a new upper door trim (and maybe a new seal). The tint shop is going to replace it. But I am very wary of anyone other than myself or an Infiniti service technician taking apart my door. I have some questions.

The vinyl part next to the window/upper part of the door - is it a separate part or part of the whole interior of the door?

Any idea how much this part or the whole thing would cost?

Is everything held together by clip/screw or is their glue involved?

I know there was a DIY in the FAQ/DIY section on how to remove the door panel, but it only showed manual pictures. Could anyone link me to a DIY to remove the door panel with real photos. I know I saw post on here somewhere that had it. Just can't find it and I tried searching for it too.

Any help would be much appreciated.



2k4 - 6 mt, diamond graphite coupe

 

You think you had a bad day? That lady is going to have a really bad day when you give her a quote for that part. It's one entire piece and dealer cost is about $500. So they probably sell it for about $650-$700. All of the little pieces are riveted together and then "melted" so it's one piece.

Russ

Black 6MT Coupe
Jax, FL
PS2 and Headrest Monitors Thread