i know this thread has probably been asked before, but how the hella are you spose to change out your HID bulb, blinker bulb and fog lights, the clearance strip was easy, but the others seem very hard to reach and unclip since their in further, do you have to remove the wheel? i tried doing this by turning my wheel and still find it almost impossible to get to the blinker light bulb, and was impossible for me to see what im doing to unclip, remove the HID bulb and the fog lights... sigh, please help. I really do not wanna remove my bumper or wheels just in order to change out these bulbs. Please help me find the easiest way possible... thanks...

 

I was able to change the fog, barely, by turning the wheel in the appropriate direction, and removing the black clips/screws on the front-side wheel well plastic cover. It is a bitch to get those bulbs out, and I'm sure the HID is equally as hard seeing as it is in the same position relative to the side of the car, only higher up.

As for the blinker, I'm guessing you have to remove the wheel and the entire wheel-well cover to get the angle with your hand to remove and replace the metal U-clip that holds the bulb in place (assuming this is the same clip used on the HID/fog).

If you are going to do all 3, I would just take off the wheel and save the trouble of contorting your hand into un-natural positions.

-Chris

 

Look here - my turn signal mod. should give you an idea of how and where these things are...



My G-enie