Found front/rear sway bars for $135 shipped, is this a good price and are they worth it?

 

It is good price, but needs pics to confirm the condition..

 

Saw them on Ebay with pics..what should I watch out for? Are they better than stock?

 

It is a good price. And yes they are better than stock; you will notice a big difference with the handling.

 

This may be a stupid question but are the sway bars the same for the 350/G35?

 

I think they are. I just checked a website and it shows the stillen, eibach and hotchkis as 350z/g35. I doubled checked with another website and it says the same thing.

 

Thought so but wanted to check.

 

Thats an awesome price, make sure they're legit.

 

Good price and great mod. Got a pic?

 

The plus with Stillen sways is that they are 3 way adjustable and larger than OEM bars. Once they're on you'll notice immediate difference, set them on MED. that's the center hole and the neutral setting. Look very close at the pic, each end should have three holes and they should be P/C red if they're authentic Stillen sways....Good Luck! Great Price!
Gary

 

Thanks for the feedback, they are red and have 3 holes. I saw the Godspeed/Fairlady sway bars also and started a thread in the suspension forum to see if anyone has used them and had anything good/bad to say about them.

 

I am getting the Stillen's for $175 shipped, in case anyone is interested they are oon sale on Stillen's web site for $250 shipped which seems like a great deal!

Can I use my stock bushings-they have 24,500 miles on them-or should I get different ones and if different what do you recommend and where is the best place to get them?

 

If your stock bushings arent cracked or anything then you can use them. If they are cracked you can pick up some bushings from your local Nissan dealer for like $4 each.

 

Way better than OEM bushing are urethane bushing, check with Stillen because most of the ones on the market will not fit their sway bars. It's a great addition to the sways cause they'll never wear out and you may as well do the job right the first time....
Gary

 

Where can I get the ureathane bushings?