G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

Just got my MD 5/16 spacer and Z-tube Stillen intake!!

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 12-16-2009, 01:07 AM
gsoto999's Avatar
Registered User
Thread Starter
Join Date: Nov 2009
Location: so cal homiee!!
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
Talking Just got my MD 5/16 spacer and Z-tube Stillen intake!!

Well after lots of research and going through the forums on intakes and plenum spacers, i finally went with the 5/16 Motordyne Copper Iso thermal plenum spacer and got the Z-tube with Stillen intake. I wanna give big props to Infiniti of Riverside for hooking me up! Now my G really pulls when i floor it and sounds soo damn sexy!! Especially after 3000 RPM. I'll post up pics of the set up asap!!
 
  #2  
Old 12-16-2009, 10:12 AM
XLR8_'s Avatar
Registered User
Join Date: Apr 2009
Location: el paso tx
Posts: 1,156
Received 135 Likes on 98 Posts
did you really notice gains???? and i was actually looking in to getting the skunk2 should i or do u recommned the mt spacer?
 
  #3  
Old 12-16-2009, 11:17 AM
SxExCx's Avatar
Former G35driver Vendor
iTrader: (307)
Join Date: May 2005
Location: SoCal
Posts: 9,562
Received 457 Likes on 237 Posts
MD is the #1 choice of G/Z enthusiests
 
  #4  
Old 12-16-2009, 11:33 AM
tiguy99's Avatar
Registered User
iTrader: (2)
Join Date: Feb 2007
Location: Chicago
Posts: 4,315
Received 30 Likes on 25 Posts
At your level, the next bang for your buck is to add an HR Y pipe! The two go hand in hand.

That's the order in which I installed my mods and couldn't have been happier. After that...HFCs but that's a different convo for another day
 
  #5  
Old 12-16-2009, 02:21 PM
BonBG35's Avatar
Registered User
Join Date: Jun 2009
Location: NYC
Posts: 429
Received 2 Likes on 2 Posts
MD definately.

HR Y pipe if you can find one.
 
  #6  
Old 12-17-2009, 12:34 PM
a1exder's Avatar
Registered User
Join Date: Mar 2009
Location: Queens, New York
Posts: 144
Likes: 0
Received 0 Likes on 0 Posts
MD spacers FTW!

ya know if you have the money or close to it save up and buy a full exhaust becasue your gonna want one sooner or later
 
  #7  
Old 12-17-2009, 01:32 PM
gsoto999's Avatar
Registered User
Thread Starter
Join Date: Nov 2009
Location: so cal homiee!!
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
Yeah i love the gains from the MD spacer and the Stillen Z tube intake combo, i couldnt imagine it with a better exhuast! I'm thinking of getting the Tanabe medallion Touring exhaust, i love the deeep sound of it!
 
  #8  
Old 12-17-2009, 03:59 PM
elperuano's Avatar
Registered User
iTrader: (4)
Join Date: Aug 2009
Location: Davie
Posts: 1,598
Received 1 Like on 1 Post
Hks ftmfw!
 
  #9  
Old 12-17-2009, 04:49 PM
a1exder's Avatar
Registered User
Join Date: Mar 2009
Location: Queens, New York
Posts: 144
Likes: 0
Received 0 Likes on 0 Posts
werd HKS is gooood
stillen
nismo
depends what you like
 
  #10  
Old 12-18-2009, 03:05 AM
gsoto999's Avatar
Registered User
Thread Starter
Join Date: Nov 2009
Location: so cal homiee!!
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
HKS too damn expensive for me LOL! i do like the nismo sound though and not too expensive for me... so i might lean in that direction.. soo what else after the exhaust can i do to my car performance wise with out voiding my warranty? i already got the MD copper spacer 5/16, stillen z tube intake combo...then exhaust is next. what should i get next? thanks for your help!
 
  #11  
Old 12-18-2009, 11:04 AM
gary c's Avatar
Registered User
iTrader: (10)
Join Date: Feb 2005
Location: Valencia, Ca
Posts: 19,433
Received 1,132 Likes on 1,002 Posts
Great Choices

Great choice of first mods! I've had five exhaust systems on my coupe and getting an aftermarket y-pipe is worthless when compared to a full cat-back system....been there! If you want a good exhaust and can't afford a new system check our MARKETPLACE, there's always a member demoding his G. In good shape it should cost you 1/2 the price of new....
Gary
 
  #12  
Old 12-18-2009, 11:27 AM
SlickSilverG's Avatar
Registered User
Join Date: Jun 2009
Location: NJ
Posts: 462
Received 10 Likes on 8 Posts
I'm going borla, I want dem two pipes, and rather the H pipe, and rather not spend 2k on hks. Forget the Y pipe, geeeyyy. But to each their own.
 
  #13  
Old 12-18-2009, 11:35 AM
tiguy99's Avatar
Registered User
iTrader: (2)
Join Date: Feb 2007
Location: Chicago
Posts: 4,315
Received 30 Likes on 25 Posts
Originally Posted by SlickSilverG
I'm going borla, I want dem two pipes, and rather the H pipe, and rather not spend 2k on hks. Forget the Y pipe, geeeyyy. But to each their own.
Well I wouldn't say geyyyy....it all depends on what people want out of their car.

When I had the stock exhaust, I LOOVED the sound of it. So much it was hard for me to even accept anything the sounded different. The order of which I upgraded my components reflected this. For me the HR Y pipe plus, ztube & Plenum spacer upgrades helped me retain that stock sound I loved and even amplified it some more for me exactly where I wanted the sound to be (maybe 10-15% louder???)

Eventually I came across a sweet deal for the Fast Intentions exhaust I have now and jumped on it. At first I didn't like it and thought it was way too loud for my taste with my Berk HFCs.

After some time, I got used to it and came to respect both exhausts for what they are and sound like. Each one is unique in its own way with the advantage to the FI true dual since it actually has some power gains over the stock exhaust
 
  #14  
Old 12-18-2009, 11:43 AM
SlickSilverG's Avatar
Registered User
Join Date: Jun 2009
Location: NJ
Posts: 462
Received 10 Likes on 8 Posts
Nismo is by far the closest to stock sound but louder. Borla has a deeper growl, and I want something a little more beast than exotic. But you will start to lose the stock sound with HFCs/straight pipes and headers.
 
  #15  
Old 12-18-2009, 03:10 PM
BonBG35's Avatar
Registered User
Join Date: Jun 2009
Location: NYC
Posts: 429
Received 2 Likes on 2 Posts
Originally Posted by SlickSilverG
Nismo is by far the closest to stock sound but louder. Borla has a deeper growl, and I want something a little more beast than exotic. But you will start to lose the stock sound with HFCs/straight pipes and headers.
My FI HFC amplified the stock growl and didn't change the tone. Not sure about test pipes i just know they make it loud as hell. Isn't it when you change the Y pipe that the stock tone changes?
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Just got my MD 5/16 spacer and Z-tube Stillen intake!!



All times are GMT -4. The time now is 10:45 AM.