how can i make more torque on my coupe
Thread Starter
|
Registered User
Joined: Sep 2008
Posts: 16
Likes: 0
how can i make more torque on my coupe
I have a 2003 coupe 5at I have aem short ram, megan headers with test pipes, and y pipe its runing really rich
i need to know how can make more torque on low rpm range
after 3500 or 4000rpm it spins first like its has torque like crazy i want it to do that at low rpm range
i need to know how can make more torque on low rpm range after 3500 or 4000rpm it spins first like its has torque like crazy i want it to do that at low rpm range
Ohio G Club moderator
iTrader: (31)
Joined: Jan 2008
Posts: 3,369
Likes: 4
From: KY tri state area/FL keys
https://g35driver.com/forums/drivetr...tial-swap.html
simple and cheap..should get u off the line alittle better
simple and cheap..should get u off the line alittle better
Trending Topics
Your mods have pushed up your powerband higher in the RPM range. I don't think your going to get the best of both worlds, massive low end Torque and high end HP without forced induction.
If you put HFC's on instead of test pipes you may get back some low end Torque.
Deffinately get a tune though!
If you put HFC's on instead of test pipes you may get back some low end Torque.
Deffinately get a tune though!
Thread Starter
|
Registered User
Joined: Sep 2008
Posts: 16
Likes: 0
ok i put a pully kit and i added the 5/16 skunk2 plenium spacer 
i went and got a tune for nitrous 100shot but another thing that made me lose alot of torque was my timing was advanced i left i at o it ran way better then +2 that it was have u guys seen the 350z with an ls2 motor thats something sick
i went and got a tune for nitrous 100shot but another thing that made me lose alot of torque was my timing was advanced i left i at o it ran way better then +2 that it was have u guys seen the 350z with an ls2 motor thats something sick
ok i put a pully kit and i added the 5/16 skunk2 plenium spacer i went and got a tune for nitrous 100shot but another thing that made me lose alot of torque was my timing was advanced i left i at o it ran way better then +2 that it was have u guys seen the 350z with an ls2 motor thats something sick
i went and got a tune for nitrous 100shot but another thing that made me lose alot of torque was my timing was advanced i left i at o it ran way better then +2 that it was have u guys seen the 350z with an ls2 motor thats something sick
Registered User
Joined: Nov 2008
Posts: 348
Likes: 8
From: Charlotte, NC
You are looking at the problem from the wrong perspective. There is plenty of tq to be had down low, you just need to plant it. Try a nice set of coilovers and better tires.
http://www.bcracing-na.com/products.php?view=RAM_Type
http://www.summitracing.com/parts/NI...?rtype=10http:
http://www.bcracing-na.com/products.php?view=RAM_Type
http://www.summitracing.com/parts/NI...?rtype=10http:
https://g35driver.com/forums/drivetr...tial-swap.html
simple and cheap..should get u off the line alittle better
simple and cheap..should get u off the line alittle better
Gary
Thread Starter
|
Registered User
Joined: Sep 2008
Posts: 16
Likes: 0
wat do u mean the pulleys dont add torque so the way the car pulls i just magic now come on i also put new tires bfgoodrich gforce but idk if that has something to do with it well my friend has a 06 turbo must 420whp and 390tq and i beat him by about almost 2 cars before i put the pullys i would beat him by a car