So here is the problem when i reverse i hear a cleck cleck sound coming from the r rear wheel, then when put on Drive and step on it i hear it again cleck cleck cleck. But only once each time.. like after i go foward and it makes the cleck sound, then i will never hear it again until a reverse the car again and put it on drive. Wierd i took the wheel out looked everywhere could not find anything wrong so im just posting probably will make a youtube video and post it later

I had this before. apparently its something in the rear axle. i took it to the infiniti dealership and they just had to clean it. mine doesnt click anymore! it should be covered by warranty. (my car is 2007). i've read on this forum that others have had it. dont worry, your car is not breaking

axle.

Search rear axle click for DIY fix to your problem.

if you're still on warranty, dealer will fix it. it's real axle bearing.

Hey thanks everyone i called the dealer today and they did confirm it was the rear axle but im at 100k no warranty they quoted me 367$ for both sides

Take it to nissan man. I had them do it for me as soon as I was out of warranty for $160 (if I remember correctly). This can be a DIY as well (as Blue Dream stated).

And if it comes back nissan will fix it again for nothing (within 18 months of the initial fix).

Will they fix it? i didnt know they did.. I am going to give them a call tomorrow thanks a lot man

Yeah they know exactly what the issue is. Take it to them and let them know you want the rear axel clicking fixed. It's a common problem in 350's as well. If they quote you more to fix it then let them know that you've spoken to friends that had this same issue fixed on their g35 at Modern Nissan of Lake Norman (NC) for $160. It's fairly easy to get the price down with some simple negotiation (should you need to).

its not that hard to fix yoru self. i did it my self even though it didn't click.

i went thru similar problem and got raped by dealership. my total after replacing both rear wheel bearings was 500!!

no warrenty

I did it myself, i just replaced the bearings and cleaned it. Runs better then new :]