Can i get burnt tips on my stock exhaust?
Do not cut your stock exhaust and weld titanium tips on them.
Most are just thin tips and welding it on would look hideous.
Plus, the tips themselves are $50+ for EACH, why not just add
a few hundred and get yourself a whole catback exaust system?
i wanted to do the same! personally i love the stock exhaust tone and ive had bad experiences with aftermarket exhausts therefore im not going with a whole new catback. if someone does do this let me know how much $$$ it is. burnt tips on an IP should look
Actually, you can get the burnt titanium look with the stock tips. I forget what kind of gasses are used to burn them, but it is possible.
Things have changed I guess. I posted a thread back in '09 with the same idea but got called out as being ricer.
~$50 for the tip, these are the correct size I believe for stock catbacks: http://www.autobarn.net/rafltrslcute.html
Have to have your stock tips cut off and rewelded on.
~$50 for the tip, these are the correct size I believe for stock catbacks: http://www.autobarn.net/rafltrslcute.html
Have to have your stock tips cut off and rewelded on.
lol if you like the stock exhaust rock it, don't be cutting and changing tips to make it look like "racer" and aftermarket if you aren't going to swap exhausts. nothing is wrong with the oem look,,,
Good call! Those tips look really good but kinda expensive!
its been done on here, its not as bright blue as the aftermarket. Probably need a hotter heat source that a portable torch provides. Some g35driver guru should be able to find one pretty quickly on here. Remove the rear bumper, or the muffler before you try though!
Picture isn't showing up but it's probably just my iPhone screwing up. What'd you use to burn it?







