DIY: cool Japanese CPV35 DIY sites
#1
DIY: cool Japanese CPV35 DIY sites
Sorry if this has been mention before, but I was browsing some Japanese G35 sites and came across this cool DIY so I though I may share. Off course all credits goes to the author of the site.
This is the LEDs construction...
This is how it looks when turned on. I think they'll be cool with euro clear side markers but may be to bright
Comparing to original where it may generate hot spot effects.
You can find the article here...
LED DIY
--------------------------------LED parking light-----------------------
The author also modify the PIAA LED 168 because it was too blue and IMO it looks much better with the white LEDs.
Again, the article is LED Parking
There are other cool DIY in that side too. Its ok even if you dont understand japanese because it have detail step by step pictures.
This is the LEDs construction...
This is how it looks when turned on. I think they'll be cool with euro clear side markers but may be to bright
Comparing to original where it may generate hot spot effects.
You can find the article here...
LED DIY
--------------------------------LED parking light-----------------------
The author also modify the PIAA LED 168 because it was too blue and IMO it looks much better with the white LEDs.
Again, the article is LED Parking
There are other cool DIY in that side too. Its ok even if you dont understand japanese because it have detail step by step pictures.
#2
Re: DIY: cool Japanese CPV35 DIY sites
Here's some more...
Rear Lamp turn singal mod
Door reflected plate LED
Muffler ground
Esprit POWER Intake Kit
Underbody Air reflector
Rear Lamp turn singal mod
Door reflected plate LED
Muffler ground
Esprit POWER Intake Kit
Underbody Air reflector
#3
Re: DIY: cool Japanese CPV35 DIY sites
Cool diy site, although i'm having difficulty decoding his english. The pictures do help out a little bit.
Something interesting I noticed on the site is how different things are in Japan than they are here. For example the following picture, they've debaged their cars and put G35 on there, kinda like how in teh states, G35 owners have changed over to the SKyline 350GT badging. And after browsing the products this fellow uses, the Oil, Differential fluid looks foreign to us in the states. And whats up with all the added grounding points everywhere??
<P ID="edit"><FONT class="small"><EM>Edited by ozracer01 on 10/24/04 09:01 PM.</EM></FONT></P>
Something interesting I noticed on the site is how different things are in Japan than they are here. For example the following picture, they've debaged their cars and put G35 on there, kinda like how in teh states, G35 owners have changed over to the SKyline 350GT badging. And after browsing the products this fellow uses, the Oil, Differential fluid looks foreign to us in the states. And whats up with all the added grounding points everywhere??
<P ID="edit"><FONT class="small"><EM>Edited by ozracer01 on 10/24/04 09:01 PM.</EM></FONT></P>
#5
#6
Registered User
iTrader: (2)
Join Date: Aug 2002
Location: Bay Area
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Re: DIY: cool Japanese CPV35 DIY sites
If you take a look at the Stillway Titanium muffler and check out the welding section, that is some incredible welding job.. outside of factory welds, I haven't seen anyone shop here do such a clean job of it..
Also, wonder if we can get the Nismo high flow cats and the Nismo brake hose set..
man.. Japan has all the cool stuff.. just about everything is cool.. from food to cars to electronics.. makes me want to move there..
Also, wonder if we can get the Nismo high flow cats and the Nismo brake hose set..
man.. Japan has all the cool stuff.. just about everything is cool.. from food to cars to electronics.. makes me want to move there..
#7
Re: DIY: cool Japanese CPV35 DIY sites
what is that underbody air reflector?
and what kind of ground wires are they using in japan? they look like the stainless brake lines and not the audio wires we are using. anyone know where to get wiring like that?
G35s6mt/TSecu/350Z Springs&Struts/K&Nfilter+Z-tube/StillenDualExhaust /6WireGroundKit/KinetixHighFlow
and what kind of ground wires are they using in japan? they look like the stainless brake lines and not the audio wires we are using. anyone know where to get wiring like that?
G35s6mt/TSecu/350Z Springs&Struts/K&Nfilter+Z-tube/StillenDualExhaust /6WireGroundKit/KinetixHighFlow
Trending Topics
#8
Registered User
iTrader: (3)
Join Date: Apr 2003
Location: Hamilton, NJ
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
Re: DIY: cool Japanese CPV35 DIY sites
Very interesting, i love how they infiniti up the car or "OEM" it out what ever they may call it just like we JDM everything. Im not getting the street sweeper air defletor things.
-----------------------------------------------------------------------
http://www.G350Z.com/
-----------------------------------------------------------------------
http://www.G350Z.com/
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
04-23-2018 11:13 AM
Ninjay16
Audio/Video/Electronics
11
02-26-2018 06:14 PM