hello i have a 2003 g35coupe.

i just bought spc front and rear camber kits im going to install them myself.
looks fairly simple

just not sure were to set the front ball joint exactly and if i should install the shims or not...

but i also have stance gr+ coilovers im putting on to.

now i live near barrie, ontario, canada but i will drive to toronto if there's some one good at what they do. for a reasonable price

i have 20" t1s wheels on there and i need to get this car correctly aligned by some one who knows what they are doing with aftermarket camber set ups,

who do you recommend, hopefully someone can help soon so i can set everything up..

also what should i be aiming for alignment specs how much negitive?

 

You should be aiming for your camber and toe to be in spec unless you are running aggressive wheels, then I need to know your offsets, width and tire size in order to help tell you how much camber you may need.

Tonnes of guys go to Altech, they're great at what they do and the price is better than anywhere else really.

Altech Automotive @ $60/alignment
384 Olivewood Rd,
Etobicoke, Ontario, M8Z 2Z9
416-231-1611
- they have long custom ramps to accommodate lowered cars
- will mount their sensors to your wheels with care, just ask nicely!

 

Simone in Newmarket.
Vic is a great guy & will look after you.

 

ok so i have 9.5 front and 11" rears,
245/35/20 front and 275/30/20 rear
front +15 and rear +25

i may put spacers on +15 on the rear once i get it lowered, have to see how flush it looks first,

Altech Automotive sound like a good price, but if you can help me out with the cammber and toe spec's i need that would be great because im lost at that part, the tires are used but they are about 70%.