G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

Melted Fusable link/wiring harness...$3000 repair!

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 09-13-2011, 06:05 PM
STL_G's Avatar
Registered User
Thread Starter
Join Date: Oct 2004
Location: St. Louis, MO
Posts: 115
Likes: 0
Received 2 Likes on 1 Post
Melted Fusable link/wiring harness...$3000 repair!

So, after searching this site, I found no answers. The service dept at the dealer is also stumped at how this happened.

Starting about 2 weeks ago my G wouldnt start from time to time. I got a jump and went on my way. I replaced the battery with a new OEM one and it seemed to work fine for about a week. The car again wouldnt start again. I jumped it about 2 more times and went about my business. I called dealer and said that I thought it was an alternator problem, they concured. The next available appt was a week out, so I continued to take my chances and drive it. The G finally woulnt start while being jumped so I had it towed.

Dealer calls me today and says the fusable link on the wiring harness (the positive terminal wire/fuse) melted and may have melted into the wiring harness. If it did melt into the harness they said about $1000 for part (which I found new OEM ones for about $700) but labor would be 10-15 HOURS! So we are talking roughly $3000 for this repair.

Has anyone else had this issue? Is this engine harness really that difficult to change out?

Please let me know your thoughts/advise/experience!

Thank you so much.
 
  #2  
Old 09-13-2011, 06:07 PM
Massios's Avatar
Registered User
iTrader: (4)
Join Date: Dec 2009
Location: South Carolina
Posts: 436
Received 41 Likes on 24 Posts
Now's your chance for a 6 speed swap tbh.

Protip: Don't jump cars made after the 70s more than once.
 
  #3  
Old 09-13-2011, 06:51 PM
jibberjabbers's Avatar
Banned
iTrader: (8)
Join Date: Apr 2009
Posts: 3,968
Received 32 Likes on 25 Posts
Buy the wiring harness and let a local garage do the swap.

I'm guessing, to do the job right, you have to pull the engine.
 
  #4  
Old 09-13-2011, 07:15 PM
KPierson_'s Avatar
Registered User
Join Date: Sep 2010
Location: Dayton, Ohio
Posts: 168
Likes: 0
Received 3 Likes on 3 Posts
Figure out exactly what is wrong and only replace what needs to be replaced. If your fusible link / fuse area has been damaged and can not be reused only replace that part. The rest of the harness should be fine.
 
  #5  
Old 09-13-2011, 07:28 PM
AuAltima3.5's Avatar
Registered User
iTrader: (2)
Join Date: Jun 2006
Location: TN
Posts: 737
Received 36 Likes on 29 Posts
Originally Posted by KPierson_
Figure out exactly what is wrong and only replace what needs to be replaced. If your fusible link / fuse area has been damaged and can not be reused only replace that part. The rest of the harness should be fine.
I am a fan of doing things the right way, but is it possible to fix the melted parts only? Just looking at it is the whole thing melted or just a few parts? I don't even know what we are talking about here, but just trying to help out. 3k? That is 25% of what I paid for my car...
 
  #6  
Old 09-13-2011, 07:31 PM
KPierson_'s Avatar
Registered User
Join Date: Sep 2010
Location: Dayton, Ohio
Posts: 168
Likes: 0
Received 3 Likes on 3 Posts
Well, a wire harness is made of copper wire. Copper wire can be spliced easily and reliably. There is most likely a fairly thick wire leading up to the fusible links. The other end then goes to the battery. You could possibly go to a junk hard and get the positive terminal, fusible link, and 12" of wire for less then $50. You could then pay someone to solder it back on and insulate it for another $50.

Whether or not it's the "right" way it is a $100 repair that if done right will last as long as the car as opposed to a $3,000 repair that will last as long as the car.
 
  #7  
Old 09-13-2011, 07:39 PM
STL_G's Avatar
Registered User
Thread Starter
Join Date: Oct 2004
Location: St. Louis, MO
Posts: 115
Likes: 0
Received 2 Likes on 1 Post
The dealer thinks it melted into the harness itself. I will know for sure tomorrow. How the hell did it melt in the first place???
 
  #8  
Old 09-13-2011, 07:45 PM
STL_G's Avatar
Registered User
Thread Starter
Join Date: Oct 2004
Location: St. Louis, MO
Posts: 115
Likes: 0
Received 2 Likes on 1 Post
I also agree with just soldering the melted wires and fixing at the area of the problem. I am sure the dealer wont do that option. If I do have to go that route it would have to be towed. At this point, with 120,000 miles I may just do a trade in. I saw an off lease 2008 g37s coupe loaded for $22,000 and my car is in excellent shape (except for harness) so I should get a decent price for trade in (kbb said about 10-12k). Just dont want another car payment. Thanks for the input.
 
  #9  
Old 09-13-2011, 07:47 PM
KPierson_'s Avatar
Registered User
Join Date: Sep 2010
Location: Dayton, Ohio
Posts: 168
Likes: 0
Received 3 Likes on 3 Posts
It could have been from cranking the car on a dead battery. The lower the voltage the more current your starter will pull trying to start. In theory, the fuse should blow before it melts, but after 7 years of aging and oxidizing it is possible that a little resistance has built up in the fuses and that will add to the heat.
 
  #10  
Old 09-13-2011, 07:48 PM
KPierson_'s Avatar
Registered User
Join Date: Sep 2010
Location: Dayton, Ohio
Posts: 168
Likes: 0
Received 3 Likes on 3 Posts
Oh, and you are right, the dealership won't just replace the part needed - they most likely don't have the skill set necessary to actually fix the problem without replacing the entire part!
 
  #11  
Old 09-13-2011, 07:49 PM
GR6RR's Avatar
Registered User
iTrader: (9)
Join Date: Mar 2007
Location: Sonny35 / SOCAL :)
Posts: 4,041
Received 152 Likes on 118 Posts
^ 10k-12k for trade in? GLW that... These cars sell for that much

I guess in Missouri it cost more? Any, GL on your search to find a fix.
 
  #12  
Old 10-19-2011, 09:00 PM
STL_G's Avatar
Registered User
Thread Starter
Join Date: Oct 2004
Location: St. Louis, MO
Posts: 115
Likes: 0
Received 2 Likes on 1 Post
So, apparently there was a surge of power that didn't trip the 100 amp fuse in the fuse relay at the battery and this is what caused the melting. The mechanic at the dealer went above and beyond to fix this. He went after hours (on his own time) and found a 100 amp fuse and wiring and rewired it. The DEALER saved me a ton of money! For this the mechanic recieved a $100 gift certificate to my favorite local italian restaurant (Charlie Gittos on the Hill) in STL. The dealers are not all bad!
 
The following 2 users liked this post by STL_G:
Blue Dream (10-20-2011), ThatOneDude (10-19-2011)
  #13  
Old 10-19-2011, 09:27 PM
ThatOneDude's Avatar
Registered User
iTrader: (10)
Join Date: Nov 2008
Location: WASHINGTON STATE
Posts: 1,611
Received 182 Likes on 142 Posts


Happy for you, but still, what exactly did you have to pay? How long ago was this fix? If it was a month ago, has it been working wonderfully for the past month? if it was just now or very recent, please report back later to let me/us know if the problem is truly solved (assuming you didn't actually WATCH them "fix" it).
 
  #14  
Old 03-05-2015, 01:43 PM
STL_G's Avatar
Registered User
Thread Starter
Join Date: Oct 2004
Location: St. Louis, MO
Posts: 115
Likes: 0
Received 2 Likes on 1 Post
Sorry for the delay, must have missed your post. I now have driven the car an additional 45k miles, no issues. The dealer charged me $600 and had the car back the next day. Again, Bommarito Infiniti is the only dealer to buy my next Infiniti. I have now purchased 3 Infiniti's from them.
 
  #15  
Old 03-05-2015, 02:09 PM
G2B35AGN's Avatar
Registered User
iTrader: (10)
Join Date: Mar 2013
Location: Raleigh, NC
Posts: 1,821
Received 335 Likes on 287 Posts
Coupe, Premium package, sport suspension
Delay? LOL! 3.5 years, that's back from the crypt!
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Melted Fusable link/wiring harness...$3000 repair!



All times are GMT -4. The time now is 09:41 PM.