need plexi glass 3/4 thick!
#1
#2
Originally Posted by chester
Any one know where i can get a 3/4 inch plexi glass about 1'x1' jacksonville or gainsville or somewhere around there. PLS HELP!!!! ASAP
Also, you have mail in 5 minutes...
![Cool](https://g35driver.com/forums/images/smilies/cool.gif)
#3
Well you can buy it from this place... USPlastic but it isn't cheap.
Also, search under polycarbonate... Many aircraft manufacturers and large aquarium manufacturers use plexiglass this thick. Also, apparently it's used for making speaker enclosurers... Good Luck!
Also, search under polycarbonate... Many aircraft manufacturers and large aquarium manufacturers use plexiglass this thick. Also, apparently it's used for making speaker enclosurers... Good Luck!
Last edited by neffster; 12-26-2004 at 10:07 PM.
#4
Originally Posted by chester
Any one know where i can get a 3/4 inch plexi glass about 1'x1' jacksonville or gainsville or somewhere around there. PLS HELP!!!! ASAP
My suggestion is get out the phone book.
#5
Very expensive!
http://www.selectproducts.com/html/frame2/frames2.htm
Why do you need 'glass so thick?
When you use glass that small (1'x1') you can get away with using thinner glass.
I built this box a few years back: http://www.angelfire.com/oh2/pierson...mages/box1.jpg
It had (5) 12" speakers in a diamond config. The back sub was mounted in 3/16" glass! The 'glass never broke. Keep in mind this was a ported box so there would be less pressure on the inside of the box. Had it been a sealed box I would have went with 1/2".
http://www.selectproducts.com/html/frame2/frames2.htm
Why do you need 'glass so thick?
When you use glass that small (1'x1') you can get away with using thinner glass.
I built this box a few years back: http://www.angelfire.com/oh2/pierson...mages/box1.jpg
It had (5) 12" speakers in a diamond config. The back sub was mounted in 3/16" glass! The 'glass never broke. Keep in mind this was a ported box so there would be less pressure on the inside of the box. Had it been a sealed box I would have went with 1/2".
Thread
Thread Starter
Forum
Replies
Last Post
alxmlr789
20 Inch
9
01-26-2016 10:04 AM
tadmcmichael
Brakes
1
10-18-2015 01:47 PM
benm722
The G-Spot
1
09-20-2015 01:29 PM