05 coupe power seat switches HELP
05 coupe power seat switches HELP
The power seat switch that controls seatback angle stopped working several months ago. The seat would recline but not raise back up, so I unbolted the seat and removed the switch unit. After cleaning inside the micro switches and putting everything back together it worked fine for a few days before becoming intermittent. Now just recently it went from intermittent to not working again. So today I removed the switches again to see if I could notice what was going on. Cleaned the inside again and mechanically inspected everything before putting back together.
Now my seat works intermittently again. It seems random as to when it decides to recline or incline now. If I press and release the switch to the rear 10X, it may actually recline the seat 2X. Same for the incline. But all the other switches have and continue to work perfect. I've fiddled with varying degrees of pressure on the switch, etc. but it continues to be completely random.
Looking to sell my G soon and would like to solve this issue for potential buyers. Any advice??
Selling her because I lost my job so hoping for an economical fix..
Now my seat works intermittently again. It seems random as to when it decides to recline or incline now. If I press and release the switch to the rear 10X, it may actually recline the seat 2X. Same for the incline. But all the other switches have and continue to work perfect. I've fiddled with varying degrees of pressure on the switch, etc. but it continues to be completely random.
Looking to sell my G soon and would like to solve this issue for potential buyers. Any advice??
Selling her because I lost my job so hoping for an economical fix..
thanks cv, I have no idea where to get a switch from tho...
not quite.. cleaned the solder points and checked the wires. IIRC the circuit board is attached to the side of the switch with a conductor path running from the bottom of the switch to the board. No real access to it. Would look again but mannn that micro switch is a SOB to put back together... might just have to tho. thx
not quite.. cleaned the solder points and checked the wires. IIRC the circuit board is attached to the side of the switch with a conductor path running from the bottom of the switch to the board. No real access to it. Would look again but mannn that micro switch is a SOB to put back together... might just have to tho. thx
Oh ok thx I'll give it a shot then, I just hope they dont make me buy the whole seat
Dude I broke one of the plastic connectors on my dead pedal, so it was real loose and wobbled
I thought 'no prob, I'll just pick one up @ the dealer'
They told me they couldn't sell me just the connector or even the dead pedal. It was part of the carpet assy so they wanted $600
I immediately walked out and bought superglue for $5.49.
Now its like it was never broken
Dude I broke one of the plastic connectors on my dead pedal, so it was real loose and wobbled
I thought 'no prob, I'll just pick one up @ the dealer'
They told me they couldn't sell me just the connector or even the dead pedal. It was part of the carpet assy so they wanted $600

I immediately walked out and bought superglue for $5.49.
Now its like it was never broken
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
vstypicals
Buying, Selling & Leasing Discussion
6
Jul 20, 2015 10:55 PM
brian_z
New Members Check In
0
Jul 20, 2015 01:30 AM




