im about to order a dynotune nitrous kit and slap a 35shot on there till i get a tune will i be good ?? im almost full bolt on except headers i dont want to blow or mess anything up .. also will prolly throw on +1 colder plugs does anyone have a part number ?? im most likely going to dyno it before i get the kit so i see whats my a/f ratio whats a good number to be in ?? want to see if im running lean

 

if youre going to be doing nitrous you need to get a good a/f ration gauge. The aem uego is the way to go.

 

You will be fine with a 35 shot just don't cut corners with the kit. You might want to get a window switch, along with the a/f gauge, you might want to get a nitrous pressure and fuel pressure gauge jus to be able to monitor that. If you plan not to spray to often, then you should be fine with a stock tune, but a tune always helps.

 

Good plugs are NGK LFR6AIX-11, please get a tune... at least tune it for your bolt ons then spray, you're most likely running very lean and adding NOS to that is no bueno man

 

Very inclusive list and great advice, I also suggest a Throttle Position Activation Switch if not included with NO2 Kit because of Drive By Wire TB.