Delete This Thread.

 

Junk yard. I'm pretty sure there are other nissan/infiniti models that use the exact same connector, but you'd have to take one of your side markers out and try to find one that fits.

My first hunch is to check a Maxima since they have side markers in the bumper like our cars do.

 

What'a dumb azz, why cut wires when all you need to do is disconnect something you don't want to use? I'd find a Nissan/Infiniti boneyard and buy what you can from a G35s side marker lights then just splice the wires, they're clearly marked. I like the crimp connectors, fast and easy....Gary

 

unfortunately, this happens more than you might think, especially when the lights are stolen and ripped out, and normally your only option is a new wiring harness which is like 500$+, however we researched and found a place that manafactured them for us at a fraction of the cost of the wiring harness, but it's still $110 shipped and I have only 4 left, but if you can't find a suitable replacement, that's an option

 

Do you have socket 4 in the side marker?
Do you have the clip that goes into the socket 4?

 

Well, Phil@GRUBBS, looks you have a cheaper option you could offer your customers. I'm sure part # 26251-AM800 is less expensive than a whole new harness. Cut the wires, splice into front harness, bam, problem solved.

 

I don't have any pieces besides the light and the wires hanging from it, there are 2 wires , So I just need to order part #26251-AM800, and #4, and just connect the wires together, and bam, I'll be good to go, thanks!!

 

yep, we searched hi and low, before contracting that out, so if those fit, we are defintely going to offer that up instead! checking now

 

that's greatness, it fits!
I have both peices
$35 shipped
i've ordered 5 more, in case other G35 drivers need this soon

 

<--- I believe this is part of the side marker light, unless you are talking about that harness that is circled?

thanks!

~Phil~

 

Please post pictures of what you HAVE. It'll be easier to tell what you need.

If you need item #4 in that picture, just order some clear corners, that part will come with them. If the wires in your bumper are cut (no connector) then you'll also need the harness to splice in.

 

You guys are on the right track. That is exactly why I was asking was left behind after the previous owner hacked up the wires. This really should be a cheap and easy DIY fix depending on what components haven't been hacked away, i.e., the harness, the clip, the wires, etc...

In fact, if you have 03-05 headlights and want to get crazy like me, you can order a few 7443 sockets and bulbs and splice them onto the existing blinkers wires. Then replace the 194 socket with the 7443 socket (this takes some dremel work and silicon). The side markers will then light up and blink with the headlights. I have a thread about it somewhere.

 

here is a pic of exactly whats left, i have the clear corner and these wires, need everything else...

 

So all you need is the clip that goes into the bulb harness of the side marker?

 

Yeah i need to buy the harness to connect to those 2 wires which will clip into the bulb socket and then to the side marker