suspension /:
#1
#2
#3
to be honest im not completely sure yet, i want springs that will lower me a good 1.5 to 2 inches......
#4
You do not need rear toe arms. Toe arms will only work if you go with a true rear coilover. You may want toe bolts but there is no arm available if you're still using oem style springs. SPL makes a toe adjustable bucket but its expensive and just the bolts will suffice. You wont know with certainty if you need them until you get oman alignment rack so you may as well have them handy.
#6
For clarification purposes the front toe is almost infinitely adjustable as well, you'll have no problems there.
For a 1-2" drop you should also be fine without messing with rear camber, but it wouldn't hurt you to get the adjustable camber arms. I usually see the SPC rear camber arms being sold with the toe bolts as a kit from most vendors so that solves both problems.
For a 1-2" drop you should also be fine without messing with rear camber, but it wouldn't hurt you to get the adjustable camber arms. I usually see the SPC rear camber arms being sold with the toe bolts as a kit from most vendors so that solves both problems.
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
12-18-2018 05:43 PM