6MT will not rev past 2.5k, just replaced Camshaft sensor Bank 2
#1
6MT will not rev past 2.5k, just replaced Camshaft sensor Bank 2
Okay so I had a SES light on with the code P0345... It called for a Camshaft position sensor replacement so i went ahead and replaced it today. I did an ECU reset and the car started but with a hardstart like before. I drove it around and no SES light went off but I cant rev past 2500 rpm or the car will flutter almost like it will stall... same thing in Neutral. I need help please!!!
#7
Trending Topics
#8
What do you recommend cleaning it with? I use dust off but idk if i should do more... Also I started it again today and it would rev fine but then SES came on with the same code... p0345 WTF!! Im saving my $80 and returning it pronto lmfao. Also when I reset the code I could rev fine again but the the SES would come back and BOOM same problem... Help please!!
#9
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,301
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods
#10
Okay so I returned the sensor and bought some of that CRC MAF cleaner and sprayed it on my sensor's and their connectors (hopefully it doesn't do harm, im thinking it wont). When that and the original sensor was done, the car still hard started but I could rev normally without going into limp mode like it would after one rev. I haven't drove it around so I dont know if the code will come back. Hopefully not
#11
#14
#15
Dam im having the same issue but if i unplug my cam sensor bank 2 the car runs fine just takes a while to start. If i plug the cam sensor in, the car wont go past 2500 rpm. Throws 2 codes only, p0345 and p0328 which i already replaced the the crank sensor, bank 2 cam sensor, and knock sensor. Dam g35