Fender Liner keeps ripping...?

Subscribe
Apr 22, 2015 | 10:54 AM
  #1  
Ok so at first I realized didn't even have fender liner so I got it replaced. Not even kidding its been maybe 2 weeks and its completely cracked though the middle and about to fall off again... Why is this happening ?
Reply 0
Apr 22, 2015 | 11:09 AM
  #2  
are you lowered? stock suspension?
Reply 0
Apr 22, 2015 | 11:51 AM
  #3  
Quote: are you lowered? stock suspension?
no not lowered and yes
Reply 0
Apr 22, 2015 | 03:16 PM
  #4  
Stress cracking, has your G been in an accident at all?
Reply 0
Apr 22, 2015 | 04:05 PM
  #5  
Get them from partsgeek.com. at $13/ea you can crack em all day.
Reply 0
Apr 22, 2015 | 04:11 PM
  #6  
Quote: Get them from partsgeek.com. at $13/ea you can crack em all day.
urban im not to sure tbh. And no why would I want to do that? I just want it not to break...
Reply 0
Apr 22, 2015 | 04:15 PM
  #7  
Quote: urban im not to sure tbh. And no why would I want to do that? I just want it not to break...
Are they fully secure? Or are you missing some pushtabs? Are your shocks good? Maybe you're getting too much travel over bumps/dips. Cmon, man, this can't be that hard to figure out.
Reply 0
Apr 22, 2015 | 06:30 PM
  #8  
^ +1, make sure the fender liners are fully secured. There are 3 pop rivets behind the bumper, 1 at the frame rail, 1 up top, and 1 along the arch above the frame rail. Then a screw or two at the lip of the fender. Also make sure you secure the bottom section of the liner to the undertray and bumper.
Reply 0
Apr 22, 2015 | 06:47 PM
  #9  
Patrick from your previous threads I remember your beautiful blue coupe was lowered, if the liner isn't totally secured it's flapping in the breeze when you're at speed it won't survive for long! With our members help you know where to find 'em cheap.
Gary
Reply 0
Apr 23, 2015 | 11:10 AM
  #10  
Quote: Patrick from your previous threads I remember your beautiful blue coupe was lowered, if the liner isn't totally secured it's flapping in the breeze when you're at speed it won't survive for long! With our members help you know where to find 'em cheap.
Gary
I take some pictures today but I don't think its lowered. and all my under trays and stuff are warped and everything missing screws I need the whole under bottom to be redone lol I never realized it was so bad until I really looked at it
Reply 0
Subscribe